CFT Monitor USMC
The CFT was designed to evaluate which of the following? – Correct answer-Answer:
Stamina, Agility, Strength
Which equipment is required for a CFT? – Correct answer-Calibrated scale, dummy
grenades, and measuring tape
As a CFT monitor, you must assist in the risk management(RM) process for the CFT.
Which of the following describes the RM process steps? – Correct answer-Identifying
hazards, assessing risks, determining which risks are most important, implementing
controls, and supervising the participants
The CFT monitor is responsible for setting up the events, scoring accurately, using
proper equipment, and __ – Correct answer-ensuring participants wear the
proper uniform
Which of the following are tasks performed by the CFT monitor during an actual CFT? –
Correct answer-Ensuring proper technique, calling out repetitions.
Location choices for the movement to contact event include outdoor or indoor venue.
What are the minimum location requirements you will need to meet? – Correct answerReasonable level, few to no obstacles
During the maneuver to contact event when may Marines remove uniform blouses? –
Correct answer-With the commander’s authorization
As a CFT monitor, you have setup the movement to contact event on an out-and-back
route. The start and finish lines are the same. What is the minimum number of monitors
required for this route? – Correct answer-3
The participant’s goal during the movement to contact event is to _ – Correct
answer-finish as quickly as possible
SSgt Winifred Carter a 28-year-old female, ran the movement to contact event in 3:18.
What is her score for the movement to contact event? – Correct answer-95
What are the equipment requirements for ammunition cans used in the ammunition lift
event? – Correct answer-The contents should not move excessively when lifted, grip
tape applied to the can sides, and use M2A1 5.56mm cans only.
Which of the following are common injuries associated with the ammunition lift event? –
Correct answer-Chipped teeth, black eyes, and broken noses.
The CFT was designed to evaluate which of the following?
Answer: Stamina, Agility, Strength
Which equipment is required for a CFT?
Calibrated scale, dummy grenades, and measuring tape
ensuring participants wear the proper uniform
Which of the following are tasks performed by the CFT monitor during an actual CFT?
Ensuring proper technique, calling out repetitions.
Reasonable level, few to no obstacles
During the maneuver to contact event when may Marines remove uniform blouses?
With the commander’s authorization
The participant’s goal during the movement to contact event is to _______
What are the equipment requirements for ammunition cans used in the ammunition lift event?
Which of the following are common injuries associated with the ammunition lift event?
Chipped teeth, black eyes, and broken noses.
Which location would be best suited for the ammunition lift event of the CFT?
The counting Marine stands to the side at 90 degrees of the lifting Marine
Which graphic represents a proper ammunition lift with the Marine in the lockout position?
When performing a proper ammunition lift, the repetition is counted when _____________
The ammunition can is lowered below the chin
Which location would be best suited for the maneuver under fire event of the CFT?
Measuring tape, stopwatch, cones and visible markers
The preparatory and execution commands for the maneuver under fire event are
What is the most common injury likely to occur during the maneuver under fire event?
Identify the proper form for performing the fireman’s carry
Which is the correct format for the weight field on the PFT/CFT performance worksheet?
Who must be the first person to review the Marine’s completed and signed Risk Factor Worksheet.
Commanding officers/Officers in charge
Which of the following are the responsibilities and duties of the CFT Monitor?
Selecting the CFT locations, Setting up events correctly, Accurately scoring events and recording results, Mitigating the risk of injury.
Which of the following task would a monitor perform during an actual Combat Fitness Test?
Call out time, Ensure proper technique.
Which of the following are monitor responsibilities?
Set up the field correctly, Instruct Marines to perform this event safely,Evaluate Marines’ performance accurately.
What equipment is required for the MTC event?
Stopwatch, measuring wheel, Flags, cones or other viable markers, reflective belt, when course is on a roadway
What is the authorized uniform for the MTC event?
Marine pattern utility with boots
What is a performance requirement of the MTC
The MTC requires the runner to run the course in the shortest time possible.
Which of the following are monitor responsibilities?
Set up the equipment correctly, Instruct Marines to preform this event safety. Evaluate their performance accurately.
Which of the following statements regarding the environmental consideration of the AL event is correct
The Al event may be done either indoors or outdoors
Which of these equipment items are required for the AL event?
Stopwatch, accurate to the second, ammunition cans
What environmental requirements must be met when selecting the area for the MANUF event?
It may be done indoor or outdoor, when outdoors, it is preferably done on a level, grassy area
Which of the statements correctly represent the uniform requirements for the MANUF event?
MARPAT utilities and boots, with blouse in all weather conditions.
Which of the following monitors responsibilities?
Brief participants prior to each event, Pair the Marine of the MANUF, Give commands.
The MANUF event has a number of hazards to mitigate. What is a good way to mitigate injuries from the fireman’s carry?
Use the core and legs muscles
When setting up MANUF field, the field itself is 100 yards long plus a ready area of __ yards
7
In the MANUF event the grenade pit is 5 yards by 5 yards
What special provisions are required of a marine who is 46 years or older who’s does not possess a current physical examination or Navy Annual Health Evaluation?
A risk worksheet must be completed 30-60 days before the CFT