S95 Personal Exam Questions & Answers | 75 Questions with 100% Correct Answers | Updated & Verified
S95 Personal Exam Questions &
Answers
Which duties can an S-95 Certificate of Fitness holder perform? – ✔✔Visual Inspections Only –
of fire alarm system components and smoke detectors
What is the primary purpose of Fire Alarm Systems? – ✔✔To warn building occupants and
transmit signals indicating a fire condition to the Fire Department via central station.
What is a Fire Alarm signal? – ✔✔The signal initiated by a fire alarm initiating device such as a
manual fire alarm pull station, smoke detector, water-flow switch, or any device in which their
activation indicates presence of fire.
What is a Supervisory Signal? – ✔✔A signal indicating that a system or device being monitored
has been compromised or is in an abnormal state.
Is the FDNY dispatched for Supervisory Signals? – ✔✔No. The Facility Manager should
investigate and correct the supervisory condition indicated by the FACP.
What is a Trouble Signal? – ✔✔A signal that indicates a fault with the fire equipment. It must
have an audible signal, distinctive from alarm signals
What is the maximum number of minutes that routine handling should take?– from receipt of
trouble signal by central station until initiation of the investigation by telephone. – ✔✔FOUR
minutes
Is the FDNY dispatched for Trouble Signals? – ✔✔No. Trouble Signals aren’t indicative of a fire
condition.
What is an Acknowledge Switch (ACK) ? – ✔✔This switch/button is used to acknowledge
alarm, supervisory, or trouble conditions.
Why is an Alarm Silence Switch helpful after an evacuation – while the source of alarm is being
investigated? – ✔✔This switch/button silences audible and visual devices (sirens, bells, gongs)
so it’s easier for Emergency Responders to communicate.
Which switch/button is pushed once an alarm condition is cleared? – ✔✔The System Reset
Switch
Smoke Detectors should be cleaned not less than – ✔✔Once every six months
How often should Analog Smoke Detectors be cleaned? – ✔✔One week from receipt of an
indication that cleaning is needed.
How often should Smoke Detectors be tested for smoke entry? – ✔✔Not less than once a year
After activation, which type of heat detector self-restores? Which type doesn’t? – ✔✔FixedTemperature heat detectors: Doesn’t self -restore and requires replacement. Rate of Rise heat
detectors: self-restore
Fire Alarm Circuits’ primary power source shouldn’t generate electric power exceeding which
voltage? – ✔✔277/480 volts
All abnormal conditions be investigated and noted where? – ✔✔A bound Log Book
Alarm Notification Appliance – ✔✔A fire alarm system component (bell, light, etc.) that issues
an audible, tactile, or visual alert.
Annunciator – ✔✔A unit containing one or more indicator lamps, alphanumeric displays, etc. in
which each indication provides status info about a circuit, condition, or location.
Powered by https://learnexams.com/search/study?query=