Backflow Prevention Assembly Tester Training GA Exams (Latest 2024/ 2025 Updates STUDY BUNDLE WITH COMPLETE SOLUTIONS) Questions and Verified Answers| 100% Correct| A Grade

Backflow Prevention Assembly Tester
Training Exam (Latest 2024/ 2025) Questions
and Verified Answers| 100% Correct| Grade
A
Q: What is backpressure?
Answer:
A backflow condition in which a pump, elevated tank, boiler, 0r other means results in a
downstream pressure greater than the supply pressure
Q: What is backsiphange?
Answer:
A backflow condition in which the pressure in the distribution system is less than atmospheric
pressure (sub-atmospheric)
Q: What is a bypass?
Answer:
In cross-connection control, any pipe arrangement that passes water around a protective device,
casing it to be ineffective
Q: What is a carrier?
Answer:
A human or animal that carries disease germs and can pass them to another person or animal
without getting the disease itself

Q: What is the purpose of a check valve?
Answer:
To allow flow in only one direction
Q: What is a cross connection?
Answer:
Any arrangement of pipes, fittings, fixtures, or devices that connects a non-potable system to a
potable water system
Q: What does DCVA stand for?
Answer:
Double Check Valve Assembly
Q: What is a DCVA?
Answer:
A testable mechanical device consisting of two independently operating, spring-loaded check
valves
Q: What is feed water?
Answer:
Water that is added to a commercial or industrial system and is subsequently used by the system,
such as water that is fed to a boiler to produce steam

Q: What is an incubation period for a disease?
Answer:
The time period that elapses between the time a person is exposed to some disease and the time
that person shows the first sign or symptom of the disease
Q: What is an overflow level?
Answer:
The maximum height that water or liquid will rise in a receptacle before it flows over the rim
Q: What is a potable water source?
Answer:
Water that is biologically, chemically, and radiologically safe to drink
Q: What is a potential cross connection?
Answer:
Any arrangement of pipes, fittings, or devices that indirectly connects a potable water supply to a
non-potable water source
Q: What does PVB stand for?
Answer:
Pressure Vacuum Breaker
Q: What is a PVB?
get pdf at https://learnexams.com/search/study?query=

backflow prevention assembly tester training ga exam,backflow prevention assembly tester training and certification,backflow prevention assembly tester certification,backflow assembly tester certification course,backflow prevention assembly tester license,a georgia backflow tester,asse backflow testing procedures,awwa backflow prevention assembly tester certification,asse backflow practice test,ga backflow testing,ga backflow certification,backflow prevention assembly test and maintenance report,backflow prevention assembly tester near me,louisiana certified backflow testers,local backflow testers,what is a backflow prevention assembly test,backflow prevention assembly test and maintenance report form,practice test for backflow certification,rp testing procedures,rp backflow testing procedures,backflow testing exam,tceq backflow prevention assembly test and maintenance report,backflow prevention assembly test,backflow prevention assembly tester,asse backflow test questions,youtube backflow preventer testing,youtube backflow testing,rpz testing certification,test gauge backflow,asse rpz test procedure,asse backflow tester certification,#1 backflow testing,3 valve backflow test procedure,3 valve backflow test kit,backflow prevention assembly test report,5 valve backflow test procedures,5 valve backflow test kit,7 tests

Backflow Prevention Assembly Tester Exam
V2 (Latest 2024/ 2025) Questions and
Verified Answers| 100% Correct| Grade A
Q: When testing a SVB what is the firsrt test being performed
(A) The air inlet opening point
(B) The static pressure across the check valve
(C) To verify the #2shut off hold tight
(D) To check if the SVB hold water
Answer:
The static pressure across the check valve
Q: When testing a PVB the air inlet opens upon closing the #1 shut off valve What is the most
probable cause
(A) Leaking #2 shut off valve
(B) Leaking #1 shut off valve
(C) Fouied air inlert
(D) Fouied check valve
Answer:
Leaking #2 shut off valve
Q: A 2″ AVB when used on irrigation systemsterm-15 shall be instilled
(A) 6″ above all downstream piping
(B) 18″ above all downstream piping
(C) 24″ above all downstream piping
(D) 27 3/4″ above all downstream piping

Answer:
6″ above all downstream piping
Q: What causes the relief valief valve to close on a RPZ?
(A) Reilef valve spring pressure
(B) Supply side water pressure
(C) Pressure differential between Check #1 and Check #2
(D) All the above
Answer:
Supply side water pressure
Q: When testing a RP instialled in vauil the relief valve opening point falls to zero What is
most probabie cause
(A) The relief valve is stuck shut
(B) #1 check is fouled
(C) the #2 shut off leaks by
(D) Installed improperly
Answer:
Installed improperly
Q: When field testing the DC the #1 check static differential pressure is found to be 0.0 psid
What is the most probable cause
(A) Fouied #2 Check
(B) Leaking #2 shut off
(C) Fouled #1 check
(D) Leaking #1 shut off
Answer:
Fouled #1 check

Q: The critical level for checking the air inlet of the PVB is
(A) At the air inlet
(B) At #1 shut off
(C) At #1 test cock
(D) At #2 shut off
Answer:
At the air inlet
Q: The physical operation of a Hose Bibb Vacuum Breaker is classified as a type of
(A) Dual check valve
(B) Atmospherlc vacuum breaker
(C) Pressure vacuum breaker
(D) Doubie check backflow preventer
Answer:
Atmospherlc vacuum breaker
Q: An oxygen deficient atmosphere has less than what precentage of oxygen
(A) 19.50%
(B) 10%
(C) 21%
(D) 24%
Answer:
19.50
Q: The relief valve of a RP discharges in flow and non-flow condition What is the most
probable cause
(A) Fouied #1 check
(B) Fouied #2 check
get pdf at https://learnexams.com/search/study?query=

backflow prevention assembly tester exam,backflow prevention assembly tester certification,backflow prevention assembly test and maintenance report,backflow prevention assembly tester license,backflow prevention assembly test report,backflow prevention assembly tester training and certification,backflow prevention assembly test and maintenance report form,backflow prevention assembly test and maintenance form,awwa backflow prevention assembly tester certification,what is a backflow prevention assembly test,what is a backflow assembly test,how to become a backflow tester,asse backflow testing procedures,asse backflow practice test,asse backflow test questions,backflow prevention assembly test report form,backflow prevention assembly test,asse backflow test procedures,backflow prevention assembly tester near me,asse backflow prevention standards,backflow prevention assembly test report city of san diego,what is a backflow tester,how often should backflow be tested,tceq backflow prevention assembly test and maintenance report,annual backflow prevention assembly testing,asse rpz test procedure,asse backflow tester certification,double check valve assembly test procedure,3 valve backflow test procedure,3 valve backflow test kit,5 valve backflow test procedures,5 valve backflow test kit,how to test a backflow prevention device,asse test procedures

Backflow Prevention Assembly Tester Exam
V1 (Latest 2024/ 2025) Questions and
Verified Answers| 100% Correct| Grade A
Q: A hose-bibb connection is required to have a permanently installed ? A. Atmospheric vacuum breaker B. Backflow preventer C. Pressure vacuum breaker D. Shut-off valve E. Spill-resistant vacuum breaker Answer: Atmospheric vacuum breaker Q: Atmospheric vacuum breakers must not be subject to continuous water pressure for more than hr.
A. 3
B. 6
C. 12
D. 18
E. 24
Answer:
12
Q: A submerged atmospheric vacuum breaker may be considered a(n) ?
A. Backflow preventer
B. Cross-connection
C. Expensive elbow
D. Typical installation
E. Useful training photo
Answer:

. Cross-connection
Q: Flow from the outlet of an atmospheric vacuum breaker must not reach a ? A. Closed tank B. Section of straight tubing C. Submerged inlet D. Toxic substance E. Valve Answer: Valve Q: An atmospheric vacuum breaker is not required to have a(n) ?
A. Annual field test
B. Installation elevation
C. Installation inspection
D. Label
E. Usage limitaion
Answer:
Annual field test
Q: The air-inlet valve of an atmospheric vacuum breaker is help closed by____?
A. Atmospheric pressure
B. Cotter pins
C. Gravity
D. Spring tension
E. Water pressure
Answer:
Water pressure
Q: Pressure vacuum breaker shut-off valves and test cocks will avoid freeze damage if
winterized by __?

A. Leaving all valves fully open
B. Rotating ball valve handles to 45 degree angle
C. Purging the body with compressed air
D. Removing the assembly’s internal components
E. Removing shut-off valve and test cock operators
Answer:
Rotating ball valve handles to a 45 degree angle
Q: A supply pressure loss with a functional check valve will cause a pressure vacuum breaker
to ? A. Admit air into the downstream piping B. Be subject to backpressure C. Discharge water D. Fail E. Retain water pressure downstream of the check valve Answer: Retain water pressure downstream of the check valve Q: If not marked, a pressure vacuum breaker’s critical level is ?
A. At the bottom of the valve body
B. Measured from the check valve inlet
C. Measured from the body outlet
D. Not important
E. The air-inlet valve opening
Answer:
At the bottom of the valve body
Q: A pressure vacuum breaker may have __ on the assembly’s discharge piping.
A. Auxiliary water supply looped irrigation
B. A boiler
C. A booster pump
D. Elevated piping
E. Irrigation sprinkler heads
get pdf at https://learnexams.com/search/study?query=

backflow prevention assembly tester exam,backflow assembly tester certification,backflow prevention assembly field test form,backflow prevention assembly test cost,backflow assembly tester near me,certified backflow assembly tester,what is a backflow assembly test,backflow prevention assembly tester near me,backflow prevention assembly tester list,backflow prevention assembly test report,backflow prevention assembly tester,backflow prevention assembly tester training,backflow prevention assembly test,backflow prevention assembly testing

Backflow Prevention Assembly Tester Exam
V3 (Latest 2024/ 2025) Questions and
Verified Answers| 100% Correct| Grade A
Q: A defensible backflow prevention program will maintain records on which of the following
Answer:
D. All of the above
A: backflow prevention assemblies within the system
B: complete list of certified backflow assembly testers
C: back flow prevention test reports
Q: In responding to a potential backflow incident, the water purveyor must
Answer:
D. Implement emergency response plan
Q: The loading of the first and second check valves on reduced pressure principle backflow
prevention assemblies
Answer:
B. Always different
Q: Undersized water service and second check valves on reduces pressure principle back flow
prevention assemblies
Answer:
B. May cause backsiphonage due to aspirator effect

Q: A perfect vacuum (at sea level) will raise water in a pipe a maximum of
Answer:
C. 33.9 feet
Q: The water supplier may require more frequent testing of backflow prevention assemblies
Answer:
D. All of the above
A: due to high hazards
B: due to high incidence of field test failures of the assembly
C: due to frequent internal plumbing changes
Q: To properly field test a reduced pressure principle backflow prevention assembly
Answer:
B. The outlet shut-off valves must be closed
Q: A differential pressure gauge is used to field test
Answer:
D. Bath A and C
A: reduced pressure principle backflow assemblies
C: pressure vacuum breakers
Q: Performance designs require that the pressure relief valve opening point of a reduced
pressure principal backflow assembly must open at or above the minimum of
Answer:
B. Two (2) psid

Q: When field testing a reduced pressure principle backflow assembly, the number two test
cock should be flushed
Answer:
D. With caution to prevent premature opening of relief valve
Q: During a field test, the air inlet valve on a pressure vacuum breaker must open
Answer:
A. At or above 1 psid on a differential gauge
Q: Hose Bibb vacuum breakers should be located
Answer:
B. On hose bibbs as required by code
Q: The probable cause of an Intermittent discharge of the differential pressure relief valve on a
reduced pressure relief valve on a reduced pressure principle backflow assembly in a NO FLOW
condition is
Answer:
A. Fluctuation in supply line pressure
Q: When entering a vault containing a backflow prevention assembly, the tester should
Answer:
A. Check quality of the atmosphere prior to entry
get pdf at https://learnexams.com/search/study?query=

Backflow Prevention Assembly Tester Exam
V4 (Latest 2024/ 2025) Questions and
Verified Answers| 100% Correct| Grade A
Q: The federal law placing responsibility for the protection of the public water supply on the
purveyor of the water is?
Answer:
Safe drinking water act
Q: How many inches must a pressure type vacuum breaker be installed above all downstream
piping?
Answer:
12 inches
Q: A double check BFP assembly will protect the potable water supply from?
Answer:
NON-Health hazard- Backpressure and Back siphonage
Q: How many inches must an Atmospheric vacuum breaker be installed above all downstream
piping and the highest opening?
Answer:
6 inches

Q: An atmospheric vacuum breaker is installed to protect against?
Answer:
BACKSIPHONAGE- Health hazard OR Non health hazard conditions
Q: Approved Reduced pressure principle assembly, refers to 2 shutoff valves, 4 test cocks, and?
Answer:
2 approved check valves and a Differential pressure relief valve.
Q: It is required that the test gauge be tested for accuracy at least?
Answer:
Annually
Q: Undersized water piping carrying water at high velocity can cause BACKSIPHONAGE due
to?
Answer:
The aspirator effect
Q: An air gap separation is measured from the outlet of the discharge pipe to the?
Answer:
Flood level rim
Q: The minimal type of containment protection for a non health hazard, non chemical fire
sprinkler system is?

Answer:
Double check DETECTOR Assembly
Q: The type of protection required for a closed loop heating system containing chemicals is?
Answer:
Reduced pressure principle Assembly
Q: For containment protection in a non-health hazard situation, the minimum protection
required shall be?
Answer:
Double check backflow prevention assembly
Q: Water continuosly leaking from test cock 2 during a test procedure of a pressure vacuum
breaker assembly is probably?
Answer:
Caused by leaking of inlet shut off valve 1
Q: The required backflow prevention assembly for a fire suppression system containing
chemicals is?
Answer:
Reduced pressure DETECTOR assembly OR Reduced pressure principle assembly
Q: The required type of backflow protection for a closed loop piping system containing glycol
is?
get pdf at https://learnexams.com/search/study?query=

backflow prevention assembly tester exam,backflow prevention assembly tester,backflow prevention assembly test,backflow preventer testing procedures,how to test a backflow preventer,backflow prevention assembly,backflow prevention testing,how to check a backflow preventer valve,how to test double check backflow preventer,double check valve backflow prevention assembly,how to test a dc backflow preventer,how to test an rpz backflow preventer,forward flow test backflow preventer,how to test a backflow prevention device,how to test a pvb backflow preventer,how to test a rp backflow preventer,1/2 backflow preventer,backflow prevention device testing,how to test backflow prevention devices,5 valve backflow test procedures,how to perform a backflow test

Related Posts