The Correct Answer and Explanation is:
The correct answer is 300 hp.
The all new Jeep Wagoneer S is built on the advanced STLA Large platform, which is designed specifically for battery electric vehicles. A key component of this architecture is the Electric Drive Module, or EDM. The Wagoneer S employs a dual motor, all wheel drive configuration, meaning it has one EDM on the front axle and a second EDM on the rear axle.
Each of these sophisticated EDMs is a 3 in 1 unit, integrating the electric motor, power inverter, and gear reduction into a single compact assembly. For the Wagoneer S Launch Edition, each of these modules is rated to produce approximately 300 horsepower. When combined, the two modules deliver a total system output of 600 horsepower and 617 pound feet of torque. This substantial power allows the vehicle to achieve impressive performance figures, such as a 0 to 60 miles per hour acceleration time of just 3.4 seconds.
The other options are incorrect for specific reasons. The “500kW peak discharge rate” and “100kW total capacity” (which should be 100 kWh) both describe features of the high voltage battery pack, not the electric drive modules. The battery’s capacity determines the vehicle’s range, while its discharge rate dictates the maximum power it can supply to the motors. The “3kW DC/DC converter” is a separate power electronics component. Its function is to convert high voltage direct current from the main battery to low voltage direct current, typically 12 volts, to power the vehicle’s accessories, lights, and infotainment system. It is not part of the propulsion system’s drive modules.
