Florida Firefighter Test Exam with 200+ Questions from Actual Past Exam and 100% Correct Answers Updated
Florida Firefighter Test Exam with 200+ Questions from
Actual Past Exam and 100% Correct Answers Updated
2024-2025
what initial action is the next priority after stabilizing the scene?
a) stabilize the victim
b) size-up the situation
c) establish scene security
d) communicate information ——- Correct Answer ——– a) stabilize the victim
What type of company is responsible for forcible entry?
a) truck company
b) brush company
c) engine company
d) special rescue company ——- Correct Answer ——– a) truck company
which of the following regulates all radio communication in the United States?
a) public safety answering point (PSAP)
b) federal communications commission (FCC)
c) national fire incident reporting system (NFIRS)
d) emergency service specific telecommunications center ——- Correct Answer ——–
b) federal communications commission (FCC)
what type of structural collapse occurs when the floor and/or roof assemblies on both
sides of a load-bearing wall collapse, allowing a good chance of victim survival?
a) a frame
b) pancake
c) v-shaped
d) cantilever ——- Correct Answer ——– a) a frame
In the OATH method of signaling on a search line, two tugs represents:
a) O – ok
b) H – help
c) A – advance
d) T – take-up slack ——- Correct Answer ——– c) A – advance
which of the following is an example of a push /pull tool?
a) hux bar
b) pike pole
c) drywall saw
d) battering ram ——- Correct Answer ——– b) pike pole
cutting edges on axes should be inspected for:
a) wetness or swelling
b) rust, tarnish, or dirt
c) chips, cracks, or spurs
d) cracks, blisters, or splinters ——- Correct Answer ——– c) chips, cracks, or spurs
What should a firefighter do before stepping off a ladder, parapet wall, or other place of
safety onto the roof of a burning building, especially if the roof surface is obscured by
smoke or darkness?
a) ensure the safety of all personnel who are assisting
b) direct a fire stream into an existing vertical exhaust opening
c) sound the roof for structural integrity by striking with an axe
d) direct a fire stream into an existing horizontal exhaust opening ——- Correct Answer
——– c) sound the roof for structural integrity by striking with an axe
What type of hose is designed for drafting water from static water supplies or
connecting to a fire hydrant?
a) soft sleeve hose
b) hard-suction hose
c) double-jacket hose
d) suction supply hose ——- Correct Answer ——– b) hard-suction hose
what type of fire hose damage can weaken the jacket which can lead to ruptures under
pressure?
a) organic damage
b) thermal damage
c) chemical damage
d) mechanical damage ——- Correct Answer ——– a) organic damage
which of the following equipment is necessary for service testing?
a) hose clamps
b) chaffing blocks
c) a hose-washing machine
d) nozzles with shutoff valves ——- Correct Answer ——– d) nozzles with shutoff
valves
the test site for service testing should be:
a) on a gravel area
b) on a slight grade
c) as close to the station as possible
d) large enough to lay out hose with multiple kinks ——- Correct Answer ——– b) on a
slight grade
which of the following procedures should be followed when service testing fire hose?
a) close all valves as quickly as possible
b) pick up all large-diameter hose before charging it
c) stand away from the discharge valve connection when charging hose
d) connect the hose to discharges on the pump panel side of the apparatus ——-
Correct Answer ——– c) stand away from the discharge valve connection when
charging hose
which of the following statements about Class A foam concentrates is MOST accurate?
a) Class A foam is used for structural fires, but is not suitable for wildland fires
b) Class A foam is used to prevent ignition of fires involving flammable and combustible
liquids
c) Class A foam reduces the surface tension of water, allowing better water penetration
into the fuel
d) Class A foam concentrate coats and protects application equipment; equipment
should not be flushed after use ——- Correct Answer ——– c) Class A foam reduces
the surface tension of water, allowing better water penetration into the fuel
Flammable liquids that mix readily with water are:
a) polar solvents
b) viscous liquids
c) fluorosurfactants
d) hydrocarbon fuels ——- Correct Answer ——– a) polar solvents
Which foams are required to extinguish fires of ethanol or ethanol-based fuels?
A. Class A foams
B. Synthetic foams
C. Protein-based foams
D. Alcohol-resistant foams ——- Correct Answer ——– D) alcohol-resistant foams
which of the following statements about foam proportioning is MOST accurate?
a) most Class A foams are mixed in proportions of 3 to 6 percent
b) most Class B foams are mixed in proportions of 1 percent or less
c) mixing Class A foam at a higher recommended percentage results in a thick, dry
foam
d) the percentage rate for proportioning foam is determined by the authority having
jurisdiction ——- Correct Answer ——– c) mixing Class A foam at a higher
recommended percentage results in a thick, dry foam
which of the following proportioning methods depends on the Venturi Principle to draw
foam through a hose connected to the foam concentrate container and into the water
stream?
a) injection
b) eduction
c) premixing
d) batch-mixing ——- Correct Answer ——– b) eduction
what is the mission of the fire service?
a) to provide a variety of services
b) to determine how fire loss occurs
Powered by https://learnexams.com/search/study?query=