IFSTA Chapter 12 & 13 Exam | Questions and Verified Answers| 100% Correct

IFSTA Chapter 12 & 13 Exam | Questions and Verified Answers| 100% Correct

IFSTA Chapter 12 & 13 Exam | Questions
and Verified Answers| 100% Correct
Q: How should hard intake hose be cleaned after use?
Select one:
a. Use a hose washing machine
b. Rinse with clear water
c. Sent to the manufacturer for specialized cleaning
d. Use industrial strength cleansers
Answer:
b. Rinse with clear water
Q: Exposure to _ will react to rapidly separate the inner lining of the hose.
Select one:
a. gasoline
b. mold
c. prolonged freezing temperatures
d. products of combustion
Answer:
a. gasoline
Q: What can be done to help prevent age deterioration in fire hose?
Select one:
a. Regularly repack unused hose loads
b. Leave hose in the same position the entire time it is on the drying tower
c. Pack hose loads as tightly as possible, always bending the hose in the same place
d. Load hose on its edge rather than its flat side
Answer:
a. Regularly repack unused hose loads
Q: In order to make the process of loading large diameter hose (LDH) more efficient,:

Select one:
a. many apparatus are equipped with an LDH hose roller.
b. it should always be loaded in a flat load.
c. it should be loaded in just one side of a split hose bed.
d. many apparatus are equipped with separate LDH hose beds.
Answer:
a. many apparatus are equipped with an LDH hose roller.
Q: When hose is rolled in a single section straight roll, the:
Select one:
a. male coupling is in the center of the roll.
b. roll is easily transported as part of a high-rise pack.
c. roll is too large for one firefighter to carry alone.
d. female coupling is in the center of the roll.
Answer:
a. male coupling is in the center of the roll.
Q: Hose that is stored in the fire apparatus bay:
Select one:
a. is less likely to be damaged than hose stored elsewhere.
b. will last longer than hose that is stored elsewhere.
c. does not require inspection as frequently since it is not exposed to direct sunlight during
storage.
d. must be inspected and cleaned more frequently due to exposure to oil, gasoline, and airborne
contaminants.
Answer:
d. must be inspected and cleaned more frequently due to exposure to oil, gasoline, and airborne
contaminants.
Q: Which is a guideline for loading hose into an apparatus hose bed?
Select one:
a. Tighten the couplings as much as possible with a spanner wrench.
b. Uncouple all hose sections before loading them into the bed.

c. Keep flat sides of hose in the same plane when two sections of hose are connected.
d. Pack the hose folds as tight as possible.
Answer:
c. Keep flat sides of hose in the same plane when two sections of hose are connected.
Q: A male hose coupling:
Select one:
a. has the thread on the exterior.
b. can only be connected to other male couplings.
c. has the thread on the interior.
d. can be connected to a nonthreaded coupling without an adapter.
Answer:
a. has the thread on the exterior.
Q: The part of the coupling where it attaches to the hose is called the:
Select one:
a. Higbee indicator.
b. spanner.
c. shank.
d. Higbee cut.
Answer:
c. shank.
Q: What is a disadvantage of the flat hose load?
Select one:
a. The hose folds contain sharp bends.
b. It is the most difficult hose load to make.
c. The hose is more likely to be damaged from apparatus vibration.
d. It can only be used with small diameter hose.
Answer:
a. The hose folds contain sharp bends.

Q: Which preconnected hose load has hose folds that are laid into the hose bed in an S-shape?
Select one:
a. Triple layer load
b. Minuteman load
c. Preconnected flat load
d. Preconnected combination load
Answer:
a. Triple layer load
Q: Booster hose is designed to be carried:
Select one:
a. on special booster hose carts.
b. in open-air hose beds.
c. in interior apparatus compartments.
d. on reels mounted to the apparatus.
Answer:
d. on reels mounted to the apparatus.
Q: How can mechanical damage to hoselines be avoided?
Select one:
a. Always fold the hose in the same position
b. Dry hose on the highest temperature setting
c. Deploy hoselines away from debris
d. Open nozzles and valves quickly
Answer:
c. Deploy hoselines away from debris
Q: In which hose load does the hose lay on its edge in folds that lay next to each other?
Select one:
a. Accordion load
Powered by https://learnexams.com/search/study?query=