{"id":116847,"date":"2023-08-26T09:45:31","date_gmt":"2023-08-26T09:45:31","guid":{"rendered":"https:\/\/learnexams.com\/blog\/?p=116847"},"modified":"2023-08-26T09:45:33","modified_gmt":"2023-08-26T09:45:33","slug":"nccer-bundled-exams-multiple-versions-module-1-10-questions-and-answers-2022-2023-already-passed","status":"publish","type":"post","link":"https:\/\/www.learnexams.com\/blog\/2023\/08\/26\/nccer-bundled-exams-multiple-versions-module-1-10-questions-and-answers-2022-2023-already-passed\/","title":{"rendered":"NCCER BUNDLED EXAMS MULTIPLE VERSIONS (MODULE 1-10) QUESTIONS AND ANSWERS (2022\/2023) (ALREADY PASSED)"},"content":{"rendered":"\n

NCCER Module 9 Introduction to
Materials Handling Already Passed
What is the proper procedure to lift objects? \u2714\u2714Lift with your legs, keep your back straight, and
keep your head up.
In order to work with motorized materials-handling equipment, you must be? \u2714\u2714trained,
certified, and authorized
Before attempting to lift any material, you should look for any? \u2714\u2714protruding nails, wires, or
sharp edges
Before attempting to lower and overhead load,. \u2714\u2714Consider the size of the load.
When stacking bags of material that are the same width, step back and cross key the
bags______<\/strong>. \u2714\u2714At least every 10 bags high
When moving a material cart on an inclined or declined surface, you must be sure the load does
not exceed the labeled __________capacity. \u2714\u2714weight<\/p>\n\n\n\n

NCCER Module 8 (employability skills)
Questions and Answers Graded A
a companies documented philosophy is called its? \u2714\u2714mission statement
the time to learn about a potential employer is? \u2714\u2714before an application is ever submitted
when preparing a resume, you should? \u2714\u2714format your resume chronologically
during a job search, it is good practice to? \u2714\u2714look for a job that will match your skill level
before employment begins, candidates for construction jobs most often? \u2714\u2714have a drug test
submitted
how do most employers advertise job openings? \u2714\u2714on the internet and require online
applications
critical thinking is the process of? \u2714\u2714evaluating information, then reaching a conclusion or
making a decision.<\/p>\n\n\n\n

NCCER Module 4 (Power tools)
Questions and Answers 100% Verified
when using power tools, never engage the? \u2714\u2714trigger lock.
before replacing parts such as bits, blades or disks on any tool, you must? \u2714\u2714make sure it is
disconnected from its source or energy
most hammer drills will not hammer until pressure is? \u2714\u2714applied to the drill bit against a
surface
a pneumatic drill is commonly used? \u2714\u2714when there is no source of electricity
never use a circular saw that does not have an upper blade guard because? \u2714\u2714it protects workers
from flying debris and from touching the spinning blade
when using a circular saw, be sure to cut on the waste side of the cut mark to allow for the
blades? \u2714\u2714Kerf<\/p>\n\n\n\n

NCCER Module 2 Review Questions with
Certified Answers<\/p>\n\n\n\n

    \n
  1. The number matching the words “two thousand, six hundred eighty-nine” is
    a. 2,286
    b. 2,689
    c. 6,289
    d. 20,689 \u2714\u2714b. 2,689<\/li>\n\n\n\n
  2. A bricklayer lays 649 bricks the first day,
    632 the second day, and 478 the third day. During the three-day period, the bricklayer laid a total
    of
    a. 1,759
    b. 1,760
    c. 1,769
    d. 1,770 \u2714\u2714a. 1,759<\/li>\n\n\n\n
  3. A total of 1,478 feet of cable was supplied
    for a job. Only 489 feet were installed. How many feet of cable remain?<\/li>\n<\/ol>\n\n\n\n

    a. 978
    b. 980
    c. 989
    d. 1,099 \u2714\u2714c. 989<\/p>\n\n\n\n

      \n
    1. A worker has been asked to deliver 15 scaffolds to each of 26 different sites. The worker will
      deliver a total of
      a. 120
      b. 240
      c. 375
      d. 390 \u2714\u2714d. 390<\/li>\n\n\n\n
    2. Your company has 400 rolls of insulation that must be equally distributed to 5 different job
      sites. How many rolls of insulation will need to go to each site?
      a. 8
      b. 20
      c. 80
      d. 208 \u2714\u2714c. 80<\/li>\n<\/ol>\n\n\n\n

      NCCER study guide Module 1 Basic
      Safety Questions and Answers Already
      Passed
      Companies with strong safety cultures usually have lower _ . \u2714\u2714turnover
      Safety is a learned behavior and attitude. T\/F \u2714\u2714TRUE
      Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ . \u2714\u2714unsafe conditions The activity that consists of breaking a job into its component task and then analyzing each step for potential hazards is called<\/em> _ _ . \u2714\u2714job safety analysis
      The measure of probability, consequences, and exposure related to an event is referred to as _ .
      \u2714\u2714Risk
      If there is a hole in the floor of a structure, the preferred method of protecting workers from falls
      is to _ _ _ _ _ _ _ . \u2714\u2714cover the opening and label the cover<\/p>\n\n\n\n

      The D-ring or support point on a safety harness should be placed _ _ _ _ _ _ . \u2714\u2714in the middle
      of the back
      A personal fall arrest system should be inspected monthly by a _ _ . \u2714\u2714competent person
      Lanyards that have no shock-absorbing features are used for _ . \u2714\u2714positioning
      When placing a ladder against a platform or roof, the top of the ladder should extend above the
      point where the ladder touches the platform or roof by at least _ _ _ . \u2714\u27143 feet (91 cm)
      When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as protective
      measures to prevent objects from falling and striking a person below. \u2714\u2714Toeboards, debris nets,
      canopies
      When stacking materials such as bricks or blocks, do not stack materials beyond a _ _ _ _ . \u2714\u27144:1 height-to-base ratio Benching systems are prohibited in<\/em> _ _ . \u2714\u2714Type C Soils
      <\/p>\n\n\n\n

      NCCER module 1 questions and
      answers graded A
      What are benefits of safety \u2714\u2714Lower accident rates
      less turnover
      Arc welding safety \u2714\u2714Gas welding and burning requires the use of a filter lens of not less than
      No. 4 shade
      Safety \u2714\u2714A learned behavior and attitude
      Safety culture \u2714\u2714A safety culture is created when the whole company sees the value of a safe
      work environment
      Strong safety culture \u2714\u2714Effective communication and commonly and understood and agreed
      upon goals
      Accidents \u2714\u2714An unplanned event that may our may not result in personal injury or property
      damage<\/p>\n\n\n\n

      Minor injuries \u2714\u2714Personnel may have received minor scrapes and cuts but usually return the
      next scheduled work shift
      Serious injuries \u2714\u2714Personnel received injuries that resulted in temporary disability
      Indirect costs \u2714\u2714Hidden costs that can usually be the direct costs of accident from 2 to 7 times
      What causes accidents \u2714\u2714Poor work habits
      failure to communicate
      lack of skill
      Informational signs \u2714\u2714These signs are blue and provide general info
      Danger signs \u2714\u2714Tell you of immediate hazard and that you must take certain precautions to
      make sure you are not harmed. Red black and white
      Alcohol and drug abuse \u2714\u2714Costs the construction company millions of dollars a year<\/p>\n\n\n\n

      NCCER Core Module 3 Exam Questions
      and Answers (2022\/2023) (Verified
      Solutions)
      Another name for a machinist hammer is a \u2714\u2714Ball-peen hammer
      A heavy duty tool used to drive post or other large stakes is a \u2714\u2714Sledge hammer
      The proper angle for the edge of a cold chisel \u2714\u271460 degrees
      A Reed and Prince screw comes to a relatively sharp point at \u2714\u2714the base of it’s drive socket
      When an object is plumb it is \u2714\u2714perfectly vertical
      One situation that can make a measurement with a laser inaccurate is \u2714\u2714Measuring to a highly
      reflective surface.
      Because of its stiffness, a folding rule is better than a cloth or steel tape for measuring
      \u2714\u2714Vertical distances<\/p>\n\n\n\n

      NCCER Module 5 TEST Construction
      Drawings Questions and Answers 100%
      Pass
      Plans used for work that has to do with construction in or on the earth are called \u2714\u2714Civil Plans
      The material used for the walls would be found in the? \u2714\u2714Structural Plans
      Information in a drawings title block identifies the project on the \u2714\u2714Sheet Title
      Information needed to identify lines in the symbols in a construction file can be found in the
      \u2714\u2714Legend
      Brake lines are used to show that \u2714\u2714Only part of an object is represented to save space
      In the alphabet lines an area not included in the cutting line view is shown with \u2714\u2714Section cuts
      One way that an engineers scale differs from an architect sale is that the \u2714\u2714Engineer’s scale is
      based on units of 10 metric
      <\/p>\n\n\n\n

      NCCER Module 4 Intro to power tools
      Questions and Answers with Verified
      Solutions
      A saw that has a thin one-piece blade that runs around guides, that runs around either end of the
      saw is a \u2714\u2714Band saw
      A power miter saw combines a miter box with a \u2714\u2714Circular saw
      An angle grinder is used to grind \u2714\u2714Hard heavy materials
      The adjustable tool rest on a bench grinder should be positioned \u2714\u2714One eighth of an inch from
      the grinding tool
      A good way to check the condition of the grinding wheel on a bench grinder is to \u2714\u2714Perform a
      ring test
      A grinder can catch on rough material edges and shift around, especially when using rotary bits
      called \u2714\u2714Burr bits<\/p>\n\n\n\n

      When using power tools never engage the \u2714\u2714Trigger locks
      Before replacing parts such as bits, blades, or discs on any tool, you must \u2714\u2714Disconnect the
      power source
      Most hammer drills will not hammer until \u2714\u2714Pressure is applied to the drill bit
      A pneumatic drill is commonly used when \u2714\u2714There is no electricity
      Never use a circular saw that does not have a blade guard because \u2714\u2714The guard protects you
      from touching the blade.
      When using a circular saw be sure to \u2714\u2714Cut on the waist side of the cut mark to allow for the
      blades kerf.
      Saws with fine blades that are excellent for delicate and intricate cutting are called \u2714\u2714Saber
      saws<\/p>\n\n\n\n

      NCCER Module 1 (safety) Questions and
      Answers Graded A
      companies with strong safety cultures usually have lower? \u2714\u2714incident and accident rates
      what is a statement regarding safety? \u2714\u2714it’s a learned behavior and attitude
      poor lighting, excessive noise, and inadequate guards for moving parts are examples of?
      \u2714\u2714unsafe conditions
      the activity that consists of breaking a job into its component tasks and then analyzing each step
      for potential hazards is called a? \u2714\u2714job safety analysis JSA
      a measure of the probability, consequences, and exposure related to an event is referred to as?
      \u2714\u2714Risk
      if there is a hole in the floor or a structure, the preferred method of protecting workers from falls
      is to? \u2714\u2714be guarded with marked flags or covered. (must be clearly marked)<\/p>\n\n\n\n

      the D-ring or support point on a safety harness should be placed? \u2714\u2714between the shoulder
      blades
      a personal fall arrest system should be inspected monthly by a? \u2714\u2714competent person
      lanyards that have no shock-absorbing features are used for? \u2714\u2714positioning and fall restraint.
      when placing a ladder against a platform or roof the top of the ladder should be extended above
      the point where the ladder touches the platform or roof by atleast? \u2714\u27143 feet (0.9 m)
      when performing overhead work on scaffolding what protective measures must be taken to
      prevent objects from falling and striking a person below? \u2714\u2714use of toeboards, debris nets, catch
      platforms, or canopies
      when stacking materials such as blocks or bricks, do not stack materials beyond a? \u2714\u27144:1 (4 to
      1) ratio
      what type of soil can benching not be used? \u2714\u2714type c soil<\/p>\n\n\n\n

      NCCER Module 3 (Hand Tools)
      Questions and Answers Graded A
      what is another name for a machinist hammer? \u2714\u2714Ball-peen hammer
      a heavy duty tool used to drive posts or other large stakes is called a? \u2714\u2714Sledgehammer
      what is the proper angle for the edge of a cold chisel? \u2714\u271460- degrees
      what types of screw comes to a relative sharp point at the base of its drive socket? \u2714\u2714Reed and
      Prince
      how many sides does a Hexagonal shape have? \u2714\u2714six sides
      in what way is a Spud wrench different from a Pipe wrench? \u2714\u2714the jaws are smooth
      to quickly run a nut onto a bolt that resists spinning it on with the fingers you can drive a socket
      with a? \u2714\u2714speed handle<\/p>\n\n\n\n

      NCCER Core Module 1 Questions and
      Answers Already Passed
      Companies with strong safety cultures usually have lower? \u2714\u2714Turnover
      Poor lighting, excessive noise, and inadequate guards for moving parts are examples of
      \u2714\u2714unsafe conditions
      The activity that consists of breaking a job into its component tasks and then analyzing each step
      for
      potential hazards is called a . \u2714\u2714Job Safety Analysis A measure of the probability, consequences, and exposure related to an event is referred to as <\/strong><\/em><\/strong>. \u2714\u2714Risk
      If there is a hole in the floor of a structure, the preferred method of protecting workers from falls
      is to _<\/strong>. \u2714\u2714Cover and mark it<\/p>\n\n\n\n

      The D-ring or support point on a safety harness should be placed . \u2714\u2714Between the shoulder blades, middle of your back A personal fall arrest system should be inspected monthly by a <\/strong><\/em><\/strong>. \u2714\u2714Competent person
      Lanyards that have no shock-absorbing features are used for . \u2714\u2714Positioning When placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least <\/strong><\/em><\/strong>. \u2714\u27143 Feet
      When performing overhead work on scaffolding, what protective measures must be taken to
      prevent objects
      from falling and striking a person below? \u2714\u2714toe boards, debris nets, or canopies
      When stacking materials such as bricks or block, do not stack materials beyond a _<\/strong>. \u2714\u27144:1
      Ratio<\/p>\n\n\n\n

      NCCER Module 4 Review Questions and
      Answers 100% Pass<\/p>\n\n\n\n

        \n
      1. Pneumatic tools get their power from a. air pressure b. fluid pressure c. hand pumps d. AC
        power sources \u2714\u2714a. air pressure<\/li>\n\n\n\n
      2. The most common use of the power drill is to a. cut wood, metal, and plastic b. drive nails into
        wood, metal, and plastic c. make holes in wood, metal, and plastic d. carve letters in wood,
        metal, and plastic \u2714\u2714c. make holes in wood, metal, and plastic<\/li>\n\n\n\n
      3. A masonry bit is able to drill into concrete and similar material because it has a a. countersink
        shank b. ceramic core c. whip check d. carbide tip \u2714\u2714d. carbide tip<\/li>\n\n\n\n
      4. An example of an electric power drill that is designed to be used in tight spaces is a(n) a.
        electromagnetic drill b. right-angle drill c. hammer drill d. keyless chuck drill \u2714\u2714b. right-angle
        drill<\/li>\n\n\n\n
      5. The electromagnetic drill is a a. handheld drill used on wood b. cordless drill used on masonry
        and tile c. portable drill used on thick metal d. pneumatic drill that has a pounding action \u2714\u2714c.
        portable drill used on thick metal<\/li>\n\n\n\n
      6. Hammer drills are designed to drill into a. wood, metal, and plastic b. concrete, brick, and tile
        c. drywall, fiberglass, and wood d. roofing shingles, plastic, and wood \u2714\u2714b. concrete, brick, and
        tile<\/li>\n\n\n\n
      7. A pneumatic impact wrench requires the use of a. impact sockets that are designed for
        applicable tool b. an adapter so that handheld sockets fit c. shear pins between the wrench and
        the socket d. a trigger lock to prevent accidental Starting \u2714\u2714a. impact sockets that are designed
        for applicable tool<\/li>\n\n\n\n
      8. When cutting with a circular saw, grip the saw handles a. and pull the saw toward you b.
        firmly with one hand c. and engage the trigger lock d. firmly with two hands \u2714\u2714d. firmly with
        two hands<\/li>\n\n\n\n
      9. The high speed setting on a reciprocating saw is used for a. cutting through drywall b. metal
        work c. sawing wood and other soft materials d. grinding surfaces \u2714\u2714c. sawing wood and other
        soft materials<\/li>\n\n\n\n
      10. <\/li>\n<\/ol>\n\n\n\n

        NCCER module 6 (intro to basic rigging)
        Questions and Answers Rated A
        the max load weight that a sling is designed to carry is the? \u2714\u2714rated capacity
        most alloy steel chain slings can be used in Temps up to? \u2714\u2714500\u00b0F (260\u00b0c)
        when a tattle tail has been pulled into the jacket of a synthetic sling, the sling most likely has
        been? \u2714\u2714overloaded
        if a wire rope sling appears to be damaged the decision to keep it in service must be made by a?
        \u2714\u2714competent person
        because of the need for increased toughness, shackles for most overhead lifting are made from?
        \u2714\u2714forged steel
        with type of hook is designed to be used on allay steel chain slings? \u2714\u2714grab hooks
        to lift heavy loads, all chain hoists use a? \u2714\u2714gear system<\/p>\n\n\n\n

        NCCER MODULE 7 (Basic
        communication skills) Already Passed
        in the study of communication, noise is best described as? \u2714\u2714anything that interferes with a
        message being heard or understood
        folding your arms in front of you makes it seem as if you are? \u2714\u2714distant\/unwilling to talk
        if someone does not understand what a speaker is saying, he or she should? \u2714\u2714ask questions
        when listening to instructions, the best way for listeners to make sure they get all the information
        is to? \u2714\u2714paraphrase
        an important attribute of an effective speaker is the ability to? \u2714\u2714make something complicated
        sound simple
        common documents that construction professionals need to read on the job include?
        \u2714\u2714installation manuals<\/p>\n\n\n\n

        NCCER Module 8 Basic Employability
        Skills Questions and Answers Rated A
        If you see a potential source of delay on a project, notify your ____immediately. \u2714\u2714supervisor The way you speak, act, and interact is called self-_____<\/em><\/strong><\/em><\/strong>. \u2714\u2714presentation
        Being _<\/em><\/strong><\/em><\/strong> means showing up for work on time, every day. \u2714\u2714dependable
        Discrimination towards an individual based on race, sex, religion, cultural issues, or language
        barriers is known as? \u2714\u2714harassment
        Computer systems consist of what three things? \u2714\u2714hardware, software, and operating systems
        Machine tools that are controlled by computers are called? \u2714\u2714CNC
        The process of interacting with another person or group is called a? \u2714\u2714relationship<\/p>\n\n\n\n

        NCCER Module 8: Basic Employability
        Skills Questions and Answers 100%
        Pass
        The way a person dresses, speaks, acts, and interacts with others \u2714\u2714Self-presentation
        A company’s documented philosophy is called its: \u2714\u2714Mission statement.
        The time to learn about a potential employer is: \u2714\u2714Before the application is submitted.
        When preparing a resume, you should: \u2714\u2714Format the information chronologically.
        During a job search, it is a good practice to: \u2714\u2714Look for jobs that match your skills and
        experience.
        Before employment begins, candidates for construction jobs must often: \u2714\u2714Take and pass a
        drug test.
        Most employers advertise job openings: \u2714\u2714On the Internet.<\/p>\n\n\n\n

        NCCER Electrical 1 Module 10 Questions
        and Answers Graded A
        Blue Prints \u2714\u2714An exact copy of reproduction of an original drawing
        Floor plan \u2714\u2714As viewed from above
        Site plan \u2714\u2714Location of building on the property
        Surveys show \u2714\u2714All property lines, existing public utilities and their location on or near the
        property
        Elevation drawings show \u2714\u2714The exterior face of the building
        Floor plans are in \u2714\u27142 dimension, length and width
        Topographic survey shows \u2714\u2714Property lines, contour lines, notes and symbols<\/p>\n\n\n\n

        Sectional view \u2714\u2714Is a cutaway view that shows the inside of the building
        Title block \u2714\u2714A table located in the bottom right-hand corner of an engineering drawing that
        identifies, in an organized way, all of the necessary information that is not given on the drawing
        itself. Also referred to as a title strip.
        Revision Block \u2714\u2714Shows modifications or redrawn drawings
        Architectural scale \u2714\u27141\/16″ = 1′, 1\/8″ = 1′ 1\/4″ = 1
        Engineer scale measurements \u2714\u27141″=10 units through 1″=100 units
        Metric scale 1:1 to 1:100 \u2714\u2714Millimeters are used
        Metric scale 1:200 to 1:2000 \u2714\u2714Meter is used
        CAD \u2714\u2714Computer aided design<\/p>\n\n\n\n

        NCCER Level 1 Module 10 Basic
        Electrical Construction Drawings
        Already Passed
        A cutaway view of a building or object is known as a(n). \u2714\u2714Sectional drawing What is the total connected load of Circuit A-1 if each of the Type C lighting fixtures in the figure above has a total lamp and ballast load of 150VA? \u2714\u27141,200VA In which division of the MasterFormat is electronic safety covered? \u2714\u2714Division 28 A section line on a drawing shows \u2714\u2714The location of the section on the plan On electrical drawings, a solid line with a solid circle at the end indicates wiring<\/em><\/strong><\/em><\/strong>.
        \u2714\u2714Turn down
        An electrical drafting line with a double arrowhead represents \u2714\u2714A branch circuit homerun<\/p>\n\n\n\n

        Which of the following are used in electrical drafting lines to show the number of circuits?
        \u2714\u2714Arrowheads
        In dimension drawings, the dimensions written on the drawing are \u2714\u2714The actual dimensions
        Which of the following is used in an electrical diagram to show wiring concealed in a floor?
        \u2714\u2714A dashed line
        The architects scale is designed so that one inch equals one foot \u2714\u2714False
        A circle with two parallel lines drawn through it is the symbol normally used for __<\/strong>.
        \u2714\u2714Duplex receptacles
        The NEC specifies one set of electrical drawing symbols that are used in all cases \u2714\u2714False
        Which of the following letters in the figure above shows a dimension of 1′-6″? \u2714\u2714B<\/p>\n","protected":false},"excerpt":{"rendered":"

        NCCER Module 9 Introduction toMaterials Handling Already PassedWhat is the proper procedure to lift objects? \u2714\u2714Lift with your legs, keep your back straight, andkeep your head up.In order to work with motorized materials-handling equipment, you must be? \u2714\u2714trained,certified, and authorizedBefore attempting to lift any material, you should look for any? \u2714\u2714protruding nails, wires, orsharp edgesBefore […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[25],"tags":[],"class_list":["post-116847","post","type-post","status-publish","format-standard","hentry","category-exams-certification"],"_links":{"self":[{"href":"https:\/\/www.learnexams.com\/blog\/wp-json\/wp\/v2\/posts\/116847","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.learnexams.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.learnexams.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.learnexams.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.learnexams.com\/blog\/wp-json\/wp\/v2\/comments?post=116847"}],"version-history":[{"count":0,"href":"https:\/\/www.learnexams.com\/blog\/wp-json\/wp\/v2\/posts\/116847\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.learnexams.com\/blog\/wp-json\/wp\/v2\/media?parent=116847"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.learnexams.com\/blog\/wp-json\/wp\/v2\/categories?post=116847"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.learnexams.com\/blog\/wp-json\/wp\/v2\/tags?post=116847"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}