OSHA Basic Orientation Plus Test | 50 Questions with 100% Correct Answers | Verified | Updated 2023<\/p>\n\n\n\n
OSHA Basic Orientation Plus Test
What is the most frequently cited OSHA violation? – \u2714\u2714Fall Protection
What key elements are essential to recognizing hazards and reducing or eliminating workplace
hazards? – \u2714\u2714Management commitment and employee involvement
You are encouraged to ask your coworkers\/supervisor for information whenever you have a
problem or are in doubt about what to do on a job? – \u2714\u2714True
It is your responsibility to follow all safety regulations, inform your employer of any unsafe
condition; report all injuries no matter how minor they seem and wear the proper personal
protective equipment? – \u2714\u2714True
The OSHA standard that addresses the requirements for preventing and lessening the results of a
bad release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a
process – \u2714\u2714Process safety management Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM program.
PHAs are used to identify and evaluate major processes and ensure they are – \u2714\u2714Evaluated,
Controlled, and Identified<\/p>\n\n\n\n
In the PSM standard OSHA states employees must be trained if they work with highly hazardous
chemicals. – \u2714\u2714True
Facilities are not permitted to control your entrance and exit in covered process areas. – \u2714\u2714False
What should be your first concern from the moment you enter the work site? – \u2714\u2714Safety
Under the Stop Work Authority, you have the right and obligation to stop a work activity if you
have reason to believe your own safety or a coworkers safety is in jeopardy or if the work plan is
not clearly established or understood . – \u2714\u2714True
What’s needed in order to operate a plant-owned vehicle or mobile equipment while at a facility –
\u2714\u2714qualified only authorized only
What type of work permits you may encounter on the job – \u2714\u2714safe work permits confined space
entry permits, hot work permits, line entry or line breaking permits, lockout\/tagout permits
if you are replacing a piece of equipment the new one should be the same as the one being
removed. If its not you should find out whether the change was on purpose. what is this called –
\u2714\u2714Management of change
Used only where an immediate life threatening hazard exists – \u2714\u2714Danger
Powered by https:\/\/learnexams.com\/search\/study?query=<\/a><\/p>\n\n\n\n