{"id":126801,"date":"2023-11-25T14:48:15","date_gmt":"2023-11-25T14:48:15","guid":{"rendered":"https:\/\/learnexams.com\/blog\/?p=126801"},"modified":"2023-11-25T14:48:19","modified_gmt":"2023-11-25T14:48:19","slug":"cwb-level-2-closed-book-questions-with-100-correct-answers-updated-verified","status":"publish","type":"post","link":"https:\/\/www.learnexams.com\/blog\/2023\/11\/25\/cwb-level-2-closed-book-questions-with-100-correct-answers-updated-verified\/","title":{"rendered":"CWB Level 2 Closed Book | Questions with 100% Correct Answers | Updated & Verified"},"content":{"rendered":"\n

CWB Level 2 Closed Book | Questions with 100% Correct Answers | Updated & Verified<\/p>\n\n\n\n

CWB Level 2 Closed Book
To measure the strength of a welded joint what mechanical test would you prescribe?
a) A transverse weld tension test.
b) A charpy test.
c) A CTOD test.
d) An all weld metal tension test.
e) A side bend test. – \u2714\u2714a) A transverse weld tension test.
Select the cutting process that would provide the narrowest heat affected zone when cutting 12.5
mm (0.5 in) thick carbon steel.
a) Oxy-acetylene cutting.
b) Air-carbon arc cutting.
c) Oxy-propane cutting.
d) Plasma arc cutting.
e) Laser beam cutting – \u2714\u2714e) Laser beam cutting
Which of the following refers to a welder test where a pipe assembly is placed vertically and the
joint welded in the horizontal position without rotating the assembly?
a) 1G<\/p>\n\n\n\n

b) 2G
c) 3G
d) 5G
e) 6G – \u2714\u2714b) 2G
Which of the following imperfections is normally considered as unacceptable regardless of size
or location?
a) Porosity.
b) Crack.
c) Inadequate penetration.
d) Lamination.
e) Burn-through. – \u2714\u2714b) Crack.
Select the correct penetrameter thickness for 2% sensitivity when radiographing a weldment 1.25
inches in thickness.
a) 0.012 in.
b) 0.015 in.
c) 0.025 in.
d) 0.030 in. – \u2714\u2714c) 0.025 in.
Which of the following statements concerning porosity is true?
Powered by https:\/\/learnexams.com\/search\/study?query=<\/a><\/p>\n\n\n\n