Tree\/hierarchal topology
Q: In which network can you wire multiple PCs to a home router
Answer:
LAN
Q: A infrastructure connects network devices and printers through a central access
point without the use of cabling
Answer:
WLAN
Q: The<\/em> is commonly used within a 1000Mbps Ethernet network
Answer:
Cat 5e
Q: PAN
Answer:
Personal Area network
Q: LAN
Answer:
local area network<\/p>\n\n\n\n
Q: WLAN UTP description UTP common uses UTP Connectors Coaxial Description Coaxial Common Uses Coaxial Connectors Fiber Description Fiber Connectors Cat3 Cat5 Cat5e Cat6 Cat6a Cat7 Cat7a 802.11a 802.11b 802.11g 802.11n 802.11ac 802.11i 802.11r 802.3 CSMA\/CD CSMA\/CA sources;<\/p>\n\n\n\n
Answer:
Wireless LAN
Q: CAN
Answer:
Campus Area Network
Q: MAN
Answer:
Metropolitan area network
Q: WAN
Answer:
wide area network
Q: SAN
Answer:
Storage area network
Q: VLAN
Powered by https:\/\/learnexams.com\/search\/study?query=<\/a><\/p>\n\n\n\n![\"\"](\"https:\/\/learnexams.com\/blog\/wp-content\/uploads\/2023\/12\/wgu-c172-objective-assessment-study-guide-latest-2023-2024-update-network-and-security-foundations-questions-and-verified-answers-100-correct-725x1024.png\")
<\/a><\/figure>\n\n\n\n
pairs of wires are twisted around each other to protect and cancel out interference from each other and outside sources<\/p>\n\n\n\n
analog phone cables and in copper Ethernet cables<\/p>\n\n\n\n
RJ11: A connector that supports two pairs of wires (four total); typically used in telephones.
RJ45: This is an end connector typically used with Ethernet cables and supports four pairs (eight wires);<\/p>\n\n\n\n
analog cables made of copper but specifically engineered with a metal shield intended to block signal interference<\/p>\n\n\n\n
mostly used by cable TV companies to connect their customers to the company’s facilities<\/p>\n\n\n\n
bnc, f-type<\/p>\n\n\n\n
use glass or plastic threads within cables to transfer the data using light (lasers or LEDs)<\/p>\n\n\n\n
ST: This stands for a straight tip connector
LC: This stands for lucent connector. This is a smaller version of the standard connector (SC). Usually used with SFP (small form-factor pluggable) transceivers<\/p>\n\n\n\n
used in the early 90’s for phones, 16mbps<\/p>\n\n\n\n
2tp, 100\/100m<\/p>\n\n\n\n
4tp 1000Base-T, 1G\/100m<\/p>\n\n\n\n
4 tighter tps 250mhz, 1G\/100m or 10G\/55m<\/p>\n\n\n\n
500mhz, 10G\/100m<\/p>\n\n\n\n
600mhz, 10gbps<\/p>\n\n\n\n
1000mhz, 10gbps<\/p>\n\n\n\n
This standard can provide data transfer rates up to 54Mbps and an operating range up to 75 feet. It operates at 5GHz and uses OFDM.<\/p>\n\n\n\n
This standard can provide data transfer rates up to 11Mbps with ranges of 100-150 feet. It operates at 2.4GHz and uses DSSS.<\/p>\n\n\n\n
This standard can provide data transfer rates up to 54Mbps and an operating range up to 150 feet. It operates at 2.4GHz and uses DSSS or OFDM.<\/p>\n\n\n\n
This high-speed wireless connectivity promises data transfer rates over 200Mbps. It operates at 2.4GHz and 5GHz and uses DSSS or OFDM.<\/p>\n\n\n\n
This is the next generation of high-speed wireless connectivity. This technology promises data rates up to 1Gbps and operates over the 5GHz band.<\/p>\n\n\n\n
This standard for WLAN’s provides improved data encryption for networks that use the 802.11a, 802.11b, and 802.11g standards.<\/p>\n\n\n\n
This standard is designed to speed hand-offs between access points or cells in a WLAN. This standard is a critical addition to 802.11 WLAN’s if voice traffic is to become widely deployed.<\/p>\n\n\n\n
defines LAN access method using CSMA\/CD<\/p>\n\n\n\n
Short for carrier sense multiple access with collision detection. It is the method for multiple hosts to communicate on a Ethernet.<\/p>\n\n\n\n
Short for carrier sense multiple access with collision avoidance. It is used as a method for multiple hosts to communicate on a wireless network and AppleTalk.<\/p>\n\n\n\n