CCNA 2 SRWE v7 FINAL EXAM<\/p>\n\n\n\n
Refer to the exhibit. What will router R1 do with a packet that has a
destination IPv6 address of 2001:db8:cafe:5::1? – Precise Answer
\u2714\u2714forward the packet out Serial0\/0\/0
Refer to the exhibit. Currently router R1 uses an EIGRP route
learned from Branch2 to reach the 10.10.0.0\/16 network. Which
floating static route would create a backup route to the 10.10.0.0\/16
network in the event that the link between R1 and Branch2 goes
down? – Precise Answer \u2714\u2714ip route 10.10.0.0 255.255.0.0
209.165.200.225 100
Refer to the exhibit. R1 was configured with the static route
command ip route 209.165.200.224 255.255.255.224 S0\/0\/0 and
consequently users on network 172.16.0.0\/16 are unable to reach
resources on the Internet. How should this static route be changed
to allow user traffic from the LAN to reach the Internet? – Precise
Answer \u2714\u2714Change the destination network and mask to 0.0.0.0
0.0.0.0
Which option shows a correctly configured IPv4 default static
route? – Precise Answer \u2714\u2714ip route 0.0.0.0 0.0.0.0 S0\/0\/0<\/p>\n\n\n\n
Refer to the exhibit. Which static route command can be entered on
R1 to forward traffic to the LAN connected to R2? – Precise Answer
\u2714\u2714ipv6 route 2001:db8:12:10::\/64 S0\/0\/1 fe80::2
What is a method to launch a VLAN hopping attack? – Precise
Answer \u2714\u2714introducing a rogue switch and enabling trunking
A cybersecurity analyst is using the macof tool to evaluate
configurations of switches deployed in the backbone network of an
organization. Which type of LAN attack is the analyst targeting
during this evaluation? – Precise Answer \u2714\u2714MAC address table
overflow
Refer to the exhibit. A network administrator is configuring a
router as a DHCPv6 server. The administrator issues a show ipv6
dhcp pool command to verify the configuration. Which statement
explains the reason that the number of active clients is 0? – Precise
Answer \u2714\u2714The state is not maintained by the DHCPv6 server
under stateless DHCPv6 operation.
Refer to the exhibit. A network administrator configured routers R1
and R2 as part of HSRP group 1. After the routers have been
reloaded, a user on Host1 complained of lack of connectivity to the
Internet The network administrator issued the show standby brief
command on both routers to verify the HSRP operations. In
addition, the administrator observed the ARP table on Host1.
Which entry should be seen in the ARP table on Host1 in order to
gain connectivity to the Internet? – Precise Answer \u2714\u2714the virtual IP
address and the virtual MAC address for the HSRP group 1<\/p>\n\n\n\n
Which statement is correct about how a Layer 2 switch determines
how to forward frames? – Precise Answer \u2714\u2714Frame forwarding
decisions are based on MAC address and port mappings in the
CAM table.
Which statement describes a result after multiple Cisco LAN
switches are interconnected? – Precise Answer \u2714\u2714The broadcast
domain expands to all switches.
Refer to the exhibit. How is a frame sent from PCA forwarded to
PCC if the MAC address table on switch SW1 is empty? – Precise
Answer \u2714\u2714SW1 floods the frame on all ports on SW1, excluding
the port through which the frame entered the switch.
An administrator is trying to remove configurations from a switch.
After using the command erase startup-config and reloading the
switch, the administrator finds that VLANs 10 and 100 still exist on
the switch. Why were these VLANs not removed? – Precise Answer
\u2714\u2714Because these VLANs are stored in a file that is called vlan.dat
that is located in flash memory, this file must be manually deleted.
Refer to the exhibit. A network administrator has connected two
switches together using EtherChannel technology. If STP is running,
what will be the end result? – Precise Answer \u2714\u2714STP will block one
of the redundant links.<\/p>\n\n\n\n