MSSC SAFETY 2023-2024 EXAM 200 REAL
EXAM QUESTIONS AND CORRECT
ANSWERS|NEWEST(AGRADE)
The person who performs the next step in a production process is a/an _ to the
person performing the previous step. – ANSWER- Internal customer
One benefit of having employees who are cross-trained is – ANSWER- Flexibility
in assigning workers to specific jobs
The UN (United Nations) number for a hazardous material is used for identifying –
ANSWER- The material being shipped
The primary reason for training needs in today’s manufacturing environment is –
ANSWER- Change in people/processes
The proper storage of inspection records is determined by – ANSWER- All of the
above
Documentation of inspections for emissions released into the air is regulated by the
- ANSWER- Environmental Protection Agency
Which of the following agencies requires noise level testing? – ANSWEROccupational Safety and Health Administration (OSHA)
The most common way for a chemical to enter the body is – ANSWER- Inhalation
Transportation of hazardous materials is regulated by – ANSWER- Department of
Transportation (DOT)
If a worker finds a safety guard by passed on a machine, the worker should –
ANSWER- Immediately lock and tag out the equipment
Conducting a job safety analysis is warranted when – ANSWER- A new piece of
equipment is installed
Documentation of daily forklift safety inspections is required by the – ANSWEROccupational Safety and Health Administration (OSHA)
When performing a monthly inspection of the fire system, the worker should –
ANSWER- Check the dates on the fire extinguishers
Keeping exit paths (egress) cleared and doors closed is important for which of the
following reasons: – ANSWER- Fire and safety containment
In general, refresher training on relevant emergency procedures and first aid should
be provided to employees every – ANSWER- 6 months
Use a Class A fire extinguisher to put out burning – ANSWER- Paper
An evacuation alarm just went off, but there is no sign of immediate danger. A
worker should – ANSWER- Initiate emergency shutdown procedures and evacuate
In general, documentation of fire drills should include the date and time of the drill
the evacuation time, and – ANSWER- A description of any problems observed
Which of the following items would be best to use for minor skin burns? –
ANSWER- Cool water
A worker discovers that a dust collector has failed and is blowing material onto the
building’s roof. What should the worker do? – ANSWER- Contact the supervisor or
environmental coordinator for an orderly shut down of the system
Ongoing safety concerns should be tracked and reported – ANSWER- Until
corrective action is taken to address the issue
The treatment of a puncture wound caused by a nail is most important to prevent –
ANSWER- Tetanus
Which of the following can be disposed of in a trash compactor to a landfill? –
ANSWER- Paper products
A worker notices that an employee has swallowed a cleaning chemical. What
should the worker do? – ANSWER- Call 911 immediately
What is the distance that floors should be free of combustible materials when
welding or cutting? – ANSWER- 35 feet
An important topic to include in a safety orientation is the – ANSWER- Process
used to communicate safety concerns
A worker’s plant emergency plan requires a call to 911 whenever a worker sees an
emergency. If a worker has witnessed a serious injury accident in the plant and
he/she is a qualified first responder, which of the following is an appropriate action
to take? – ANSWER- Send another employee to dial 911 and begin administering
first aid.
All OSHA required training includes making which of the following available to
workers who are being trained? – ANSWER- A copy of the OSHA standard
referred to in the training
The Hazardous Material Information System of the NPCA and NFPA uses which
of the following color codes? – ANSWER- Blue = health hazard, red = fire hazard,
orange/yellow = reactivity/instability hazard and white = special hazard/ppe
The OSHA Hazard Communication Program includes Safety Data Sheets (SDS),
container labeling, and relevant employee training requirements. OSHA requires
that a copy of this program must be – ANSWER- Readily available to all
employees
How often is 8-hour HAZMAT refresher training required? – ANSWER- Annually
In addition to a welding helmet, which of the following must also be worn for eye
protection while welding? – ANSWER- Safety glasses with side shields
When working with sharp or rough meal, a sheet metal worker should – ANSWERWear gloves and safety glasses
After a new production employee has been through the safety orientation –
ANSWER- His or her participation is documented according to company policy