CARPENTRY MODULE 2 REVIEW QUESTIONS EXAM

PDF Download

CARPENTRY MODULE 2 REVIEW QUESTIONS EXAM

QUESTIONS

Actual Qs and Ans - Expert-Verified Explanation -Guaranteed passing score -40 Questions and Answers

-Format: Multiple-choice / Flashcard

Question 1: Many adhesives and cements are flammable and/or explosive. Store them in an area that is. . .

Answer:

• -well ventilated.

Question 2: A piece of lumber 3'' in thickness and 8'' wide would be described by which of these grading classifications?

Answer:

• Joists and planks

Question 3: If a lag screws head will rest directly on wood when installed, use

• . .

Answer:

• -flat washer.

Question 4: The nominal dimensions of a typical concrete masonry are. . .

Answer:

• 8 x 8 x 16 inches

Question 5: Nail lengths are expressed in penny designations; the symbol used to represent penny is. . .

Answer:

• d

Question 6: Ground-contact grade pressure-treated lumber has a preservative retention of. . .

Answer:

• 0.40 lbs per cubic foot

Question 7: When obtaining safety information about an adhesive, the best source of reliable information is. . .

Answer:

• -the applicable MSDS.

Question 8: A piece of lumber that is 1'', 12'' wide and 1' long is equivalent to. . .

Answer:

• -one board foot.

Question 9: An action that will not reduce your chance of getting injured on the job site is to. . .

Answer:

• Disregard safety rules

Question 10: Which of the following is not a mission of Occupational Safety and Health Administration (OSHA)?

Answer:

• Establishing prevailing wages

Question 11: The adhesive that requires two components that are mixed together at the time of use is. . .

Answer:

• -epoxy.

Question 12: In the grading stamp shown in Review Question Figure 1, the term S-GRN means that the lumber. . .

Answer:

• -has a maximum 19 percent moisture content

Question 13: An engineered wood product commonly used to make doors and other millwork is.. .

Answer:

D. LSL

Question 14: The type of hardboard that is coated with oils and resins during its manufacture is.. .

Answer:

• Tempered hardboard

Question 15: Which of the following types of nail would normally not be used to secure interior trim?

Answer:

• Box nail

Question 16: A glulam beam consists of. . .

Answer:

• Solid, kiln-dried lumber glued together

Question 17: Material-handling accidents are most likely to happen when. . .

Answer:

• -workers are new or inexperienced at a job.

Question 18: Wood products that are sustainably harvested are certified by the. . .

Answer:

• -Forest Stewardship Council

Question 19: How many 4' x 8' sheets of plywood would be needed to provide subfloor for a 25' by 30' room?

Answer:

• 24

Question 20: Use the chart in Review Question Figure 2 to find the length of an 8-penny nail.

Answer:

B. 2 1/2''

Question 21: When calculating the amount of concrete needed, the unit of measure is. . .

Answer:

• -cubic yards.

Question 22: Which of the following types of sheet material is used in high-wear applications such as concrete forms, cabinets, and counter-tops?

Answer:

A. HDO

Question 23: Which of the following is applied with a caulking gun and used to adhere gypsum board to framing members?

Answer:

• Drywall adhesive

Question 24: In a tree, growth takes place in the. . .

Answer:

• -cambium layer

Question 25: A fastener that is very good for a wallboard insulation is the. . .

Answer:

• -divergent staple.

Question 26: Which of the following is not a characteristic of oriented strand board (OSB)?

Answer:

• Attractive face grain

Question 27: Which of the anchoring devices listed below is not used in solid masonry?

Answer:

• Wedge anchor

Question 28: Which of these statements about pressure treated lumber is not true?

Answer:

• It is less expensive than redwood