CWB 47.1 Exam With 100 Correct

CWB 47.1 Exam With 100% Correct Answers 2023

CSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification.True or False? - Correct Answer-True

Certification can be considered as an approval of the products fabricated by a certificated company?True or false?! - Correct Answer-False

What does "class" refer to?

• "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
• Electrode groups
• a category of welder qualification, e.g., F, H,V or O welding position
• Fillet and groove we'd combined test plate assemblies - Correct Answer-C

What does classification refer to?

• "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
• Electrode groups
• a category of welder qualification, e.g., F, H,V or O welding position
• Fillet and groove we'd combined test plate assemblies - Correct Answer-A

What organization administer CSA Standard W47.1

• there is no administrator
• Canadian standards association
• Canadian welding bureau - Correct Answer-C

The Canadian welding bureau can withdraw a company's certification if the company is NOT following the requirements of CSA standard W47.1 True or false ? - Correct Answer-True

How many divisions of certification are specified in CSA Standard W47.1 ?

• one
• two
• three
• four - Correct Answer-C

Is a company certified in division 1 required to employ a full time or retain a part time welding engineer?

• retain a part time welding engineer
• employ a full time welding engineer
• no engineer is required

• employ a full time welding inspector only - Correct Answer-B

Is a company certified in division 3 required to employ a full time or retain a part time welding engineer?

• Employ a full time welding engineer
• Retain a part time welding engineer
• retain a part time welding engineer responsible to the company only for welding

procedures and practice

• No welding engineer is required - Correct Answer-D

CSA Standard W47.1 requires each designated plant, shop or section to meet the requirements of certification within this standard with respect to welders, welding procedures specification, welding procedure data sheets, welding supervisor and welding engineer, where applicable True or false? - Correct Answer-True

A company doing only erection work involving welding must have a pony in order to be certified to CSA standard W47.1 True or false? - Correct Answer-False

When must the company inform the Canadian bureau of any loss or change in welding engineering or supervisory personnel?

• immediately
• after 3 months
• after 6 months
• the doesn't have to inform as long as the personnel is replaced after a year - Correct

Answer-A

The company shall designate an individual who, irrespective of each other responsibilities, shall have defined authority and responsibility for ensuring that the requirements of CSA Standard W47.1 are implemented and maintained True or false? - Correct Answer-True

What are the duties of the welding engineer?

• Provide engineering support to the company as required.
• Development of new welding procedures
• Periodic reviews of the company's welding practices
• preparation of WPSs and WPDSs
• all of the above - Correct Answer-E

A welding supervisor with two years of fabrication experience is acceptable for division

• company?

True or false? - Correct Answer-False

Each supervisor shall have knowledge of?

• weld faults

• Quality control
• Estimating
• both a & c pertaining to directly related to their work. - Correct Answer-D

Each supervisor shall be able to read drawings and to properly interpret welding symbols.True or false? - Correct Answer-True

Who is responsible for ensuring that the companies personnel involved in welding are qualified and working with approved welding procedures in the shop or in the field?

• the welders themselves
• no one is responsible because the welders have shown their performance abilities

when they are qualified in accordance with the standard

• the welding supervisor
• the welding engineer must ensure a satisfactory performance of welders in

production welding through continuous guidance and instruction - Correct Answer-C

If there is a reason to doubt the welders ability, his/her qualification is suspended immediately and shall be required to pass a check test in the position and class held True of false? - Correct Answer-True

What types of identification cards are issued to welders by the Canadian welding bureau?

• transferable card when qualification is based on standard test assemblies
• transferable card when qualification is based on non standard test assemblies
• nontransferable card when qualification is based on non standard test assemblies
• a letter in lieu of an identification card
• a, c, & d - Correct Answer-E

Who owns the welder cards that are issued by the Canadian welding bureau?

• the company
• the welder
• the Canadian welding bureau
• the welding supervisor - Correct Answer-C

Who is responsible for ensuring that welders identification cards or copies thereof can be produced as proof that a welder has valid qualification?

• the welder
• the Canadian welding bureau
• the company
• the welding supervisor - Correct Answer-C

If a welder has qualified on a standard test assembly, what Range of material thickness is he/she now qualified to weld?

• 1.5 mm (1/16 in) and thicker
• 3 mm (1/8 in) and thicker

• up to 5 mm (3/6 in)
• 3 mm (1/8 in) to 12 mm (1/2 in) - Correct Answer-B

For how long does a welders qualification remain in effect?

• indefinitely
• six months
• one year
• two years - Correct Answer-D

A welders qualification may be revoked by the Canadian Welding Bureau if the welder has NOT been engaged in a given process for a period of three months or more.True or false? - Correct Answer-True

For how long does a welding operators qualification remain in effect?

• indefinitely, unless there is a reason to question his/her ability
• six months
• one year
• two years - Correct Answer-A

Tack welders must be qualified.True or false? - Correct Answer-True

For how long is a tack welders qualification valid for?

• one year
• two year
• indefinitely, unless there is a reason to question his or her ability
• five years - Correct Answer-C

To what type of welding is a probationary welder restricted ?

• all production welding
• field welding only
• welding flat grooves and flat and horizontal fillets under supervision
• welding under supervision, in the position successfully completed - Correct Answer-

D

A change in the mode of metal transfer from short circuiting to spray or globular for the gas metal arc welding process requires a separate qualification.True or false? - Correct Answer-True

Welding on galvanized surfaces requires a separate qualification.True or false? - Correct Answer-True

Electrodes used for welding personnel qualification tests shall be certified by the Canadian welding bureau as conforming to the requirements of the latest edition of CSA Standard W48 or the appropriate AWS A5 series of standards True or false? - Correct Answer-True