DELL CLIENT ADVANCED ACTUAL EXAM 150 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+

DELL CLIENT ADVANCED ACTUAL EXAM 150 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+

DELL CLIENT ADVANCED 2026-2027 ACTUAL

EXAM 150 QUESTIONS AND CORRECT

DETAILED ANSWERS (VERIFIED ANSWERS)

|ALREADY GRADED A+

When the side cover of Precision Tower 7920 is not assembled, the

system will still power on. - ANSWER- False

On Latitude 14 Rugged Extreme - 7414, which light is used to

communicate error using Single LED ? - ANSWER- not Power light

We Import a Foreign configuration in a RAID Array, if: - ANSWERThe array containing foreign configuration is in an Offline state

Select statements that are true about Trusted Platform Module (TPM) -

ANSWER- not The Trusted Platform Module (TPM) is used to generate

and store keys

After completing a service incident on a Precision Tower 7920,

technician attempts to run ePSA before re-assembling the side cover.

However, system is not able to power on and displays LED error code of

4-7. What could be the issue? - ANSWER- The intrusion switch is

triggered and power is cut-off. Install the side cover to de-activate the

intrusion switch.

Before replacing any hardware, what is the recommended solution for

the BSOD or system freezing? - ANSWER- not Reseat the DIMMs

If an Edge Gateway is Blinking green after the diagnostics, what does it

indicate? - ANSWER- ePSA Pass

On a Precision Workstation, if a Hard drive status indicator flashes

green, amber and then turns off; this indicates the drive is rebuilding -

ANSWER- False

In general, an Anti-Static Mat is used to prevent Electrostatic damage -

ANSWER- True

Onsite Services for Ruggedized Notebooks are limited to CRU parts and

Service Assembly Parts. - ANSWER- True

How many thermal performance control modes are there in Alienware

Area 51m to support different user scenarios? - ANSWER- not 1.0

Overclocking is the process of making a computer or component in a

computer operate faster than specified by the manufacturer by modifying

the system parameters - ANSWER- True

In a PERC H730P controller, P stands for Performance - ANSWERTrue

iDRAC with Lifecycle Controller can be used for: - ANSWER- not OS

Deployment

A CAN (Controller Area Network) bus is a vehicle bus standard

designed to allow micro controllers and devices to communicate with

each other in applications without a host computer. - ANSWER- True

Under what scenarios can we clear the NVRAM by moving the PSWD

jumper to the RTCRST pins? - ANSWER- No POST

No Video

Where can the Field Service Manual containing Critical Callout,

Disassembly and Reassembly instructions be found? - ANSWER- PRM

/ Educate Dell

iDRAC stands for: - ANSWER- Integrated Dell Remote Access

Controller

What steps must be taken if there is a fan-related error message

displayed at the Start up, but the system boots to the OS? - ANSWERnot Check for Dust or debris on the Fans, clean them

The following items are unaffected by the RTC reset: - ANSWER- not

Service Tag