F-60 Fire Guard for Torch Operations Latest Update Questions and Verified Correct Answers Guaranteed A+

F-60 Fire Guard for Torch Operations Latest Update Questions and Verified Correct Answers Guaranteed A+

A transportation permit must be displayed on the ____. - CORRECT ANSWER: Vehicle.
 All hot work authorizations must be returned to the ____ upon completion of the work. -
CORRECT ANSWER: Responsible person.
 All original hot work authorizations must be filed with ____ hot work permit section. -
CORRECT ANSWER: The FDNY.
 All permits shall be readily available on the premises for inspection by who? -
CORRECT ANSWER: The FDNY.
 Always approach a fire from an ____ direction, never a ____ direction. - CORRECT
ANSWER: Upwind / Downwind
 Always direct the fire extinguisher chemical stream at the ____ of the flame, never at
the center of the flame. - CORRECT ANSWER: Base
 An additional F-60 fire guard is required to perform fire watch on the floor ____ if the
torch operation is being conducted in a way that allows sparks and slag to travel there. -
CORRECT ANSWER: Below.
 Any single compressed natural gas (CNG) container must not exceed ____ standard
cubic feet (SCF). - CORRECT ANSWER: 381
 Any single liquefied petroleum gas (LPG) container must not exceed ____ lbs in
weight. - CORRECT ANSWER: 100
 Areas designed for hot work operations shall have floors with ____ surfaces. -
CORRECT ANSWER: Non-combustible.
 At a construction site and torch-applied roofing system operation, every torch operator
must have ____. - CORRECT ANSWER: An F-60 COF holder performing a fire watch,
unless the 2nd torch operation is not more than 50 feet away from the fire guard.
 At least one portable fire extinguisher with a minimum 2-A:20-B:C rating must be
accessible within ____ feet of the location where hot work is performed. - CORRECT
ANSWER: 30
 Before hot work is authorized and at least ____ per day, the hot work area shall be
inspected for safety by the responsible person. - CORRECT ANSWER: Once.