FREE AND STUDY GAMES ABOUT 2203 STRICKLIN EXAM

PDF Download

FREE AND STUDY GAMES ABOUT 2203 STRICKLIN EXAM

QUESTIONS

Actual Qs and Ans Expert-Verified Explanation

This Exam contains:

-Guarantee passing score -77 Questions and Answers -format set of multiple-choice -Expert-Verified Explanation Question 1: Direct mechanical push-pull carburetor heat control linkages should normally be adjusted so that the stop located on the diverter valve will be contacted

Answer:

Before the stop at the control lever is reached in both Hot and Cold positions

Question 2: What is meant by the term "Liquid Lock"?

Answer:

Oil has collected in the bottom cylinders

Question 3: What is meant by preheating an engine?

Answer:

forces heated air into engine area to heat lubricants.Question 4: an engine misses in both the right and left positions of the magneto switch. The quickest method for locating the trouble is to?

Answer:

Check for one or more cold cylinders

Question 5: As a general rule, the mixture setting on a reciprocating engine operating at or near takeoff power that provides the best cooling is?

Answer:

Full rich

Question 6: Why is the mixture leaned out on a reciprocating engine?

Answer:

For high altitude operation Question 7: name 2 types of compression testers utilized on reciprocating engines

Answer:

Direct, and differential compression testers Question 8: Which of the following contains a minimum checklist for 100-hour inspections of engines?

Answer:

43 appendix D Question 9: Which of the following, obtained during a magneto check at 1700 rpm, indicates a short (grounded) circuit between the right magneto primary and the ignition switch?

Answer:

Both-1700 rpm, R-o RPM, L-1700 rpm, off-0 RPM Question 10: A characteristic of Dyna-focal engine mounts as applied to aircraft reciprocating engines is that the?

Answer:

Shock mounts point toward the engine's center of gravity

Question 11: What is the purpose of a power check on a reciprocating engine?

Answer:

To determine satisfactory performance Question 12: The primary purpose of baffles and deflectors installed around cylinders of air-cooled aircraft engines is to

Answer:

force cooling air into close contact with all parts of the cylinders.

Question 13: What indication may reciprocating engine exhaust system leaks be detected?

Answer:

Signs of exhaust soot inside cowling and on adjacent components

Question 14: What is the purpose of a choked cylinder barrel?

Answer:

during higher operating temperatures near the top of the cylinder a choke bore provides a straight bore during engine operation Question 15: Which of the following will be the result of an induction system leak near a cylinder?

Answer:

Lean mixture indication Question 16: Which of the following problems could be detected by a cold cylinder check?

Answer:

Defective spark plug leads Question 17: What will the result of operating an engine in extremely high temperatures using a lubricant recommended by the manufacturer for a much lower temperature?

Answer:

The oil pressure will be lower than normal

Question 18: What should be used to clean an aircraft engine?

Answer:

emulsion cleaner Question 19: What could cause excessive pressure buildup in the crankcase of a reciprocating engine?

Answer:

Plugged crankcase breather Question 20: Generally, when an induction fire occurs during starting of a reciprocating engine, the first course of action should be to?

Answer:

Continue cranking and start the engine if possible

Question 21: When starting an engine with a float-type carburetor, where should the mixture control be placed?

Answer:

Full Rich Question 22: When inspecting an aircraft reciprocating engine what document is used to determine if the proper magnetos are installed?

Answer:

Type certificate Data sheet Question 23: What are two parts of a distributor in an aircraft engine ignition system?

Answer:

Block and rotor Question 24: In the operation of an engine with a constant-speed propeller, What sequences should be followed in changing power settings?

Answer:

move prop forward then move the throttle Question 25: What fire extinguishing agent is commonly used on a reciprocating fire?

Answer:

Carbon Dioxide

Question 26: Which of the following is a primary engine instrument?

Answer:

Tachometer Question 27: Which document is used to determine that an engine conforms to its type design?

Answer:

Engine Type Certificate Data sheet Question 28: What is used to check that crankshaft oil passages are free from sludge?

Answer:

soft copper wire