.png){kind=logo}
OSHA 511 GENERAL INDUSTRY NEWEST 2026 TEST BANK ACTUAL EXAM COMPLETE 250 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+
1 | P a g e
OSHA 511 GENERAL INDUSTRY NEWEST 2026 TEST
BANK ACTUAL EXAM COMPLETE 250 QUESTIONS
AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+
What is a hole? - ANSWER- A gap or open space in a floor,
roof, horizontal walking-working surface, or similar surface that
is at least 2 inches in its least dimension.
What is an opening? - ANSWER- A gap or open space in a wall,
partition, vertical walking/working surface, or similar surface
that is at least 30 inches high and at least 18 inches wide,
through which an employee can fall to a lower level. (larger than
a hole)
True or False? Every stairway floor opening shall be guarded by
a standard railing and railing should be provided on all exposed
sides (except at entrance to stairway) - ANSWER- True
What is a standard rail? - ANSWER- Standard railing consist of
top rail, intermediate rail, and posts, and shall have a vertical
height of 42 inches nominal from upper surface of top rail to
floor
2 | P a g e
True or False? Permanent aisles and passageways shall be kept
clear and in good repairs, with no obstruction across or in aisles
that could create a hazard and shall be appropriately marked. -
ANSWER- True
What are the types of fire? - ANSWER- A - ash - paper, wood,
travel distance to fire extinguisher 75 feet or less
B - boiling - liquid, gas, travel distance to fire extinguisher 50
feet or less
C - current - electrical, can use A & B fire extinguisher
D - ding - metal, travel distance to fire extinguisher 75 feet or
less
When are cages or wells needed with fixed ladders? -
ANSWER- As of November 19, 2018, fixed ladders 24 feet or
higher, but current 20 feet.
When providing employees adequate safety during an
emergency, what is the most important factor to consider? -
ANSWER- Adequate number of exist routes
What is the maximum number of employees allowed when the
emergency action plan can be communicated orally? -
ANSWER- 10 employees; small business
3 | P a g e
When are employers required to provide workers information
and training on hazardous chemicals in their work area? -
ANSWER- When an employee is initially assigned to a work
area where hazardous chemicals are present and before
assignments involving new exposure situations
True or false? Standard 1910.1030 applies to all occupational
exposure to blood or other potentially infectious materials -
ANSWER- True
What is Industrial Hygiene? - ANSWER- Science of
anticipating, recognizing, evaluating, & controlling (AREC)
workplace conditions that may cause workers injury or illness;
employee exposure to hazards & control for hazards to protect
workers
What is an engineering control? - ANSWER- Remove hazard;
include: process change, chemical substitution, ventilation,
shielding, guarding, requires little or not employee action, but
does not include job rotation
What is the most common route of entry of a hazardous
chemical? - ANSWER- Inhale
4 | P a g e
When must an employer administer a continuing, effective
hearing conservation program? - ANSWER- Whenever an
employee noise exposure equal or exceed 85 decibels sustained
over an 8 hour work period
All portable circular saws must be equipped with what two
items? - ANSWER- 1) Guard
2) Constant pressure switch that will shut off the power when
the pressure is released
True or False? Power tools must be equipped with a constant
pressure switch or control. - ANSWER- True
Vertical Standard - ANSWER- A standard that applies to a
particular or specific group of people of industry (ex: welders)
OSHA certifies that a citation must be - ANSWER- 1)
Addressed
2) Corrections must be completed by abatement date
3) OSHA has 180 days to issue the actual citation(s)
What is CPL? - ANSWER- ComplianceÂ
.png)