A Core 2: Part 1 Study Guide Exam

A+ Core 2: Part 1 Study Guide Exam

Questions And Actual Answers .Should dfrgui.exe be uninstalled on systems with SSDs? - Answer No. You should still run a defrag on SSDs occasionally to optimize.You are troubleshooting an issue with a wireless adapter. When you open Device Manager, you find the device's icon is shown with a down arrow superimposed. What does this mean, and why might this configuration have been imposed? - Answer The icon indicates that the device has been disabled. It could be that there was a fault, or there may be a network configuration or security reason for disabling the adapter. In this sort of situation, use incident logs and device documentation to establish the reason behind the configuration change.In Windows, what is the difference between the boot partition and the system partition? - Answer The system partition contains the boot files; the boot partition contains the system root (OS files). The boot partition is normally assigned the drive letter C. The system partition is not normally assigned a drive letter.If a single physical disk is divided into three partitions in a non-Windows environment, how many different file systems can be supported? - Answer Three—each partition can use a different file system.You are monitoring system performance and notice that a substantial number of page faults are occurring. Does this indicate that a memory module is faulty? - Answer No—it shows the system is using the pagefile intensively and could benefit from more system RAM being installed.What command opens the System Information Tool? - Answer msinfo32.exe Hardware and software inventory report.How do you perform a scan to identify file system errors in read-only mode? - Answer At a command prompt, run chkdsk without any switches. Note that sfc is not the correct answer as this verifies the integrity of protected system files rather than checks the file system on a drive.Which Windows command is probably best suited for scripting file backup operations? - Answer The robocopy command offers more options than those offered by the xcopy command, so it will usually be the better choice. The copy command is quite basic and probably not suitable.A server administrator performs a statistical analysis on server operations to provide optimized resources. For example, the administrator wants to see resource performance graphs and key

• / 1