CATEGORY 3 NON-CAB OPERATED CRANE SAFETY NEWEST

CATEGORY 3 NON-CAB OPERATED CRANE SAFETY NEWEST

ACTUAL / QUESTIONS AND CORRECT ANSWERS

VERIFIED/GRADED A+

Matching ID marks on rigging gear are required for: - -----

Answers---components that can be seperated

Rigging gear test and inspection records are required to be

kept on file: - -----Answers---until rplaced by a more current

record

Documented records are required for periodic inspections of all rigging equipment.falsefalse - -----Answers---false

What are the two types of rigging gear inspections? - ----- Answers---periodic and pre-use

Who is required to perfom an inspection prior to using rigging gear, and what is this inspection called? - -----Answers---the user, preuse inspection

What is the minimum grade of chain required for chain slings?

• -----Answers---grad 80
• / 3

Chain slings used in cargo transfer should be inspected annually. - -----Answers---False

A knot in a synthetic sling is allowed as long as it does not cause permanent damage to the sling. - -----Answers---false

A metal mesh sling can remain in service if only one wire is broken in the mesh. - -----Answers---False

Rigging hardware that is bent can be repaired by straightening it back to original shape. - -----Answers---false

Rigging hardware such as eyebolts, links, rings, and shackles are required to have a periodic inspection every 2 years. - ---- -Answers---False

Distorted rigging hardware must be: - -----Answers---

Removed from service and destroyed

Documentation for alteration or repair of rigging equipment is

required to be retained for: - -----Answers---the life of the

equipment

Which section of the NAVFAC P-307 is the rigging gear section? - -----Answers---section 14

• / 3

It is okay to use home-made rigging gear as long as you are lifting light loads. - -----Answers---false

When selecting rigging gear for a job, which of the statements below should be followed? - -----Answers---all the above

What should be used between the rigging gear and the load to prevent damage to the load and rigging? - -----Answers--- appropriate sling protection

Two people can operate a chain fall if the pull chain is too hard for one person to pull while hoisting a load. - -----Answers-- -False

Pulls outside the plane of the eye are allowed on eyebolts as long as the rated load has been decreased. - -----Answers--- False

The minimum depth of thread engagement for a 3/4 inch

eyebolt into a steel object is: - -----Answers---1 1/8th inch

An angular pull of 45° is allowed on non-shoulder type eyebolts. - -----Answers---false

The rated load of swivel hoist rings must be reduced when they are used for angular pulls. - -----Answers---false

• / 3