- | Page
DRYWALL C-9 (GLOSSARY OF GYPSUM
BOARD TERMINOLOGY) UPDATED
ACTUAL EXAM WITH CORRECT SOLUTIONS.
Absorption - correct answer- The ingestion of water Into the gypsum board as determined by ASTM
accelerator - correct answer- An additive used in the manufacturing process of gypsum products that shortens time for the gypsum core to hydrate or set
across - correct answer- (Perpendicular to framing): Refers to
the application of gypsum board where long dimension is applied at right angles to the framing
adhesive - correct answer- A compound, glue or mastic used in the application of gypsum board products to framing or for the laminating one or more layers of gypsum boards
Adhesive application - correct answer- A means of applying gypsum board utilizing adhesives and supplemental mechanical fasteners 1 / 4
- | Page
adhesive bond - correct answer- The adhering characteristics of adhesives as determined by a test method specified in ASTM C 474 Sec. 14 and 15
adhesive spreader - correct answer- A notched trowel or special tool to aid in the application of laminating adhesive
adhesive wall clips - correct answer- Special clips or nails with large perforated bases for mastic application to most firm surfaces
Aerial Platform - correct answer- A lifting device for materials and workers
all purpose compound - correct answer- A joint treatment compound that can be used as a bedding compound for tape, a finishing compound, and as a laminating adhesive or texture product
Ames taping tools - correct answer- specially designed tools to mechanically apply taping compound and tape 2 / 4
- | Page
angle - correct answer- The point at which two walls intersect; a corner
Annular Ring Nail - correct answer- A deformed shank nail with improved holding qualities specially designed for use with gypsum board.
Asbestos-free compound - correct answer- Joint treatment products that have no asbestos fiber
Back - correct answer- The back surface of gypsum board. The opposite side from the face. Usually the side that would be concealed or the side in contact with the framing. Also referred to as the "code side"
Back Blocking - correct answer- A short piece of gypsum board adhesively laminated behind the joints between each framing member to reinforce the joint.
Back Clip - correct answer- Specially designed clips attached to the back of gypsum board that fit into slots or other formations 3 / 4
- | Page
in the framing to hold the gypsum board in place. Often used in demountable partition designs
Backcut - correct answer- A series of relief cuts made on the back surface to facilitate bending the piece
backing board - correct answer- 1. A gypsum product designed for use as the first or base layer in a multilayer system
- A base layer in ceiling for the adhesive application of
acoustical tile
Banding - correct answer- Metal or plastic strapping to secure bundles of gypsum products together in a shipping unit
banjo taper - correct answer- A mechanical device which dispenses tape and taping compound simultaneously
baseboard - correct answer- A vinyl, wood or metal trim or molding applied at the floor line to protect the vertical wall from damage
- / 4