.png){kind=logo}
EIC Year 1 Final Exam Actual Exam Latest Update - 1100 Questions and 100% Verified Correct Answers Guaranteed A+
As more loads are added to a series circuit, the resistance of the circuit ___.A.increases B.decreases C.stays the same
.I agree and understand. - CORRECT ANSWER: Refund Policy: Students who are enrolled and have received their log in will not be issued a refund.
.I agree and will comply - CORRECT ANSWER: BCES - Reference to "BCES" is Bay Colony Electrical Specifications and Prints.
THESE ARE FOUND IN THE CLASSROOM RESOURCE AREA - FIRST PAGE.
MAKE SURE YOU CHECK OUT ALL CLASSROOM RESOURCE PAGES.
.Yes - CORRECT ANSWER: I am aware that if I time out of my training at any point in time, I will have to pay extra to complete the training as required.
.164 - CORRECT ANSWER: An 8-32 x 3 machine screw has a diameter of ___ inches.
1 37/48 - CORRECT ANSWER: 7/8 + 8/16 +8/24 =
1,705 - CORRECT ANSWER: 1.705 V = ___ mV
7 1/2 - CORRECT ANSWER: 7 5/6 - 1/3 =
28 - CORRECT ANSWER: A 1/4 - 28 x 31/2 machine screw has ___ threads per inch.
100 - CORRECT ANSWER: Article ___ in the NEC® distinguishes between an outlet
and a receptacle.
A.
-23 - CORRECT ANSWER: -10°F = ___°C 1 / 4
A.
.006 - CORRECT ANSWER: Class A GFCIs are designed to trip when a fault of about
___ amps occurs.
A..006 B..20 C..012 D.4
A.
.2222 - CORRECT ANSWER: 8 inches = ___ yards
A."wow" - CORRECT ANSWER: A ___ is an improperly made bend in which the bent section of pipe has not been held parallel with the straight section of another bend.
A."wow" - CORRECT ANSWER: A ___ is an improperly made bend in which the bent section of pipe has not been held parallel with the straight section of another bend.
A."wow" B.kick C.comeback D.rise
A.
$1,239.00 - CORRECT ANSWER: A lead electrician earns $35,400 a year. The
employer deducts 31/2% for a company pension plan. How much is deducted a year?
A.
$4 - CORRECT ANSWER: Which of these is the symbol used for a 4-way switch?
A.$4
B.
$ 2 / 4
C.$2 D.$3
A.
$359.24 - CORRECT ANSWER: The cost for 1,250 feet of Romex® (nonmetallic
sheathed cable) is $382.50. How much would 1,174 feet of cable cost?
A.$391.56 - CORRECT ANSWER: In an area on the jobsite, you must install lights in a new triangle-shaped sidewalk. Your contract requires that this area be poured with concrete around your lights and you will have a concrete contractor do the finishing. The two sides of the area are as shown below. According to your contract with the owner, you also had to purchase the concrete for the sidewalk. The sidewalk is 51/2 inches thick and the concrete is $139 per cubic yard. The cost for the concrete is $ ___
A.
0 - CORRECT ANSWER: What is the fewest number of receptacles required by the
NEC® to be installed above a 20-foot long stainless steel countertop in the kitchen of a Restaurant? This is NOT a dwelling unit. There are two 36 inch wide stainless sinks in the countertop with 10 inches of countertop space between the two sinks. The 10 inch space is centered in the 20' length of the countertop.
A.
B.6 C.2 D.4 E.none of these
A.
0 - CORRECT ANSWER: What is the fewest number of receptacles required by the
NEC® to be installed above a 20-foot long stainless steel countertop in the kitchen of a Restaurant? This is NOT a dwelling unit. There are two 36 inch wide stainless sinks in the countertop with 10 inches of countertop space between the two sinks. The 10 inch space is centered in the 20' length of the countertop.A.
B.6
C. 3 / 4
2 D.4 E.none of these
A.
0 (or close to zero) - CORRECT ANSWER: Figure 112.226
Refer to Figure 112.226. After removing the receptacle from its package, you are going to check it with an ohmmeter. If the leads of the ohmmeter are placed between Points G and C, the meter should indicate ___ ohms.A.
- (or close to zero)
B.(or OL on a digital meter)
A.
- 1/4 - CORRECT ANSWER: Refer to partial circuit plan shown in Figure 115.103. You
- 1/4
- 1/2
- 1/8
are required to size the box that will contain a split-wired receptacle. If the cables entering this box were all #12 MC cables, what is the smallest 4" square (1900) metal box that could be used here? The box will have a 11/4"-rise plaster ring installed that adds a volume of 7.6 in3 to the total volume. The MC cables will be connected to the box using external connectors. There are NO cable clamps within this box. Hint: don't forget to count the wires for the device and the ground(s) that are in the MC cable.A.
B.
C.
D.none of these
A.1,090 - CORRECT ANSWER: Figure 107.1315 is the floor plan for a building. The plan has a rectangular area with a right-triangle-shaped area on the left end and a square- shaped area above the right side. Using all the necessary formulas, the total floor area is ___ ft2.
A.1,333 ohms - CORRECT ANSWER: If a wire 375 feet long has 500 ohms of resistance, what is the resistance of 1,000 feet of the same wire?
A.1:15 - CORRECT ANSWER: During an 8-hour work day, the electrician takes two 15- minute rest breaks. The ratio of break time to work time is ___.
- / 4
.png)