FORKLIFT OSHA TRAINING TEST ACTUAL

FORKLIFT OSHA TRAINING TEST (ACTUAL / )

QUESTIONS AND VERIFIED ANSWERS A+ GRADED

You can place your hands and feet outside of the operator's compartment, as long as your head and body are protected. - - ---Answers---False

Always check the air pressure in tires from the side, not by facing the tread. - ----Answers---False

The load capacity of a truck can be found on its data plate. - -- --Answers---True

Which of the following is NOT a type of lift truck? - ---- Answers---Air-cooled Powered

All industrial trucks (lift trucks) are equipped with controls which allow you to raise/lower and tilt the forks. - ---- Answers---True

If the mechanism on your lift fails, you should try to repair the chains or hydraulic system yourself. - ----Answers---False

• / 2

It is part of your job to complete a Daily Operator's Report after you have thoroughly inspected your lift truck. - ---- Answers---True

If your truck starts to tip over: - ----Answers---- Don't jump

• Stay in your seat
• Grip the wheel securely
• Brace yourself with your feet

What is wrong with this illustration? - ----Answers---The truck is going down an incline, facing it with the forks which have a load on them.

• Driving in the wrong direction

The gauge on the right is a/n: (C to H range) - ----Answers---

None of the above

The most important safety device on your lift truck is ___. - --- -Answers---You

Rear wheel steering is used on lift trucks because it gives the operator greater control when using the forks. - ---- Answers---True

You can stand under the forks, if the engine of the lift truck is turned off. - ----Answers---False

• / 2