JUNIPER JNCIA-JUNOS JN0-104 ACTUAL EXAM

JUNIPER JNCIA-JUNOS JN0-104 (ACTUAL / ) EXAM

QUESTIONS AND VERIFIED ANSWERS

Which key could you use to auto-complete a command in the Junos CLI?

• Delete
• Ctrl+Z
• Spacebar
• Right Arrow
• Spacebar

You have configure an SRX Series device for the first time.When you commit your configuration, the Junos OS notifies you that you cannot yet commit your configuration.Which configuration step must you complete?

• security policies
• hostname
• date/time
• root authentication
• root authentication
• / 4

Which account is used to access a Junos device in a factory- default configuration?

• root
• admin
• lab
• juniper
• root

Refer to exhibit, what will be the result?

• The device will boot in a multi-user mode at the

configuration prompt

• The device will boot in a Single-user mode at the

operational prompt

• The device will boot in a multi-user mode at the shell

prompt

• The device will boot in a Single-user mode at the shell

prompt

• The device will boot in a multi-user mode at the

configuration prompt

• / 4

You are connected to your Junos device using an SSH connection to the fxp0 interface. No other interface are currently configured beyond their default setting. You commit a configuration that makes the fxp0 interface unreachable from your management network.In this scenario, how would you re-establish communication with the device?

• Unplug the network cable and plug it back in.
• Power off and power on the device.
• Establish an SSH connection to the loopback interface.
• Connect to the console of the device.
• Connect to the console of the device.

What would you use as a network tool to open a secure terminal connection from a device running Junos OS to another device?

A. SSH

B. HTTPS

C. RDP

• telnet

A. SSH

• / 4

While working on a Junos Device, you receive the message shown.In this scenario, what would you do to stop the shutdown process?

• Issue the clear system commit command
• Issue the clear system reboot command
• Issue the request system halt in command
• Issue the request system power-off in command
• Issue the clear system reboot command

How does the PFE determine how to forward transit traffic?

• The PFE performs a destination lookup based on its own

routing table.

• The PFE determines network destinations itself based on

the RE's routing table.

• The PFE uses the following table provided by the RE.
• The PFE uses the routing table provided by the RE.
• The PFE uses the following table provided by the RE.

Referring to the exhibit, which logical interface is able to forward IP traffic?

• / 4