.png){kind=logo}
- | Page
NACE CIP LEVEL 1
EXAM WITH CORRECT SOLUTIONS.
All corrosion of iron at normal ambient conditions is - correct answer- an electrochemical process
Based on the galvanic series presented in the NACE CIP Level
- Manual, which three can be used effectively as galvanic
anodes for carbon steel? - correct answer- Zinc, aluminum, magnesium
A decrease in temperature will generally cause the corrosion rate to - correct answer- decrease
The electrolyte is the solution that carries (conducts) - correct answer- the anion, and the cations
General corrosion is described as - correct answer- uniform loss of thickness over the exposed surface
- / 3
- | Page
A corrosion inhibitor is a substance that, when added to an environment - correct answer- decreases the rate of corrosion
The four elements of a corrosion cell are anode, the cathode, the electrode, and the metallic pathway - correct answer- False
A proper coating specification should contain information regarding - correct answer- surface preparation standards, safety, locations to be coated
The anode is the - correct answer- part of the metal that corrodes
All of the following are generally included within inspection reports EXCEPT - correct answer- cost information
When applying coatings, instruction regarding appropriate types of Personal Protection Equipment (PPE) will always be found within the - correct answer- material safety data sheet (MSDS) or safety data sheet (SDS)
- / 3
- | Page
Material inventory report should contain all of the following EXCEPT - correct answer- overall cost of materials
According to the NACE attestation, it's OK to accept a gift from a contractor as long as the gift is below the value identified in your company policy. - correct answer- false
If the relative humidity is too high, solvent entrapment within the coating film may occur. - correct answer- true
The dew point is the - correct answer- temperature at which moisture condenses on a surface.
While oxidation occurs at the anode, reduction occurs at the cathode - correct answer- true
The coatings inspector must calibrate the magnetic surface thermometer at the job site. - correct answer- False
If solvent is trapped in a coating film it may - correct answer- cause problems with the curing of the film.
- / 3
.png)