NC DMV Exam Questions with 100 Correct

NC DMV Exam Questions with 100% Correct Answers Are you allowed to use left turn lanes in the middle of the road for passing or merging with traffic? - ✓✓No. They are for turning only. (pg 92)

At what Blood Alcohol Content (BAC) does the law state you are under the influence of alcohol? - ✓✓.08

At what distance should you indicate a turn or that you're stopping? - ✓✓At least 100 feet. (pg 70)

How do you safely navigate through a curve? - ✓✓Slow before you enter the curve so you don't have to brake in the curve. Braking in a curve can cause the vehicle to skid.(pg 51)

If involved in a car accident, under what circumstances are you required to make a police report? - ✓✓If anyone is injured or killed, or the total amount of damage appears to be $1,000 or more. (pg 84)

Is it best to keep your headlights on high beam or low beam in foggy or falling snow? - ✓✓Low beams. (pg 77)

Should you maintain your speed or slow down when moving toward an exit ramp? - ✓ ✓Keep up with the speed of traffic as long as you are on the main road. If the road you are traveling has exit ramps, do not slow down until you have moved onto the exit ramp.(pg 63)

Should you stop or keep moving if the warning lights start flashing or gates start to come down when you are crossing railroad tracks? - ✓✓Keep moving. (pg 58)

True or False: Drinking coffee, fresh air and cold showers can help you sober up after drinking. - ✓✓False. Only "time" will help you become more sober. (pg 40)

True or false: Drivers are not required to yield to pedestrians if they cross the roadway against ordinary traffic signals or pedestrian signals. - ✓✓False. Drivers must always yield the right of way to pedestrians. (pg 45)

True or false: You should speed up when approaching a railroad crossing to beat the signal. - ✓✓False. Slow down, keep alert, watch for the railroad crossing signal. (pg 57)

• / 2

What are the "blind spots" on a vehicle? - ✓✓he areas near the left and right rear corners of a vehicle that can't be seen using the side or rearview mirrors. (pg 69)

What do white lines on the roadway mean? - ✓✓They divide same direction traffic. (pg 91)

What do yellow lines on the roadway mean? - ✓✓They divide oncoming traffic. (pg 91)

What do you do when approaching an intersection with a malfunctioning traffic signal? - ✓✓Proceed as though all sides are controlled by a stop sign. (pg 86)

What do you do when driving on a divided highway of four lanes or more with a median separation when a school bus stops? - ✓✓Only traffic following the bus must stop. (pg 47)

What does a flashing red light mean? - ✓✓t means the same thing as a stop sign. A driver must come to a complete stop, and then proceed only when it is safe. (pg 87)

What does it mean when you see a continuous, double, solid, yellow line as the center line on a two-lane, two-way road? - ✓✓Passing is not permitted in either direction. (pg 91)

What does it mean when you see a yellow, skipped or broken line as the center line on a two-lane, two-way road? - ✓✓Passing is permitted in both directions. (pg 91)

What is the "No Zone?" - ✓✓The blind spots around a truck or bus, located in the front, on both sides and to the rear. (pg 98)

What is the "two-second rule?" - ✓✓Allow two-seconds between the time the vehicle ahead of you passes a given point and the time your vehicle reaches the same point.(pg 52)

What is the arm signal to indicate a left turn? - ✓✓Hold the arm and hand straight out and point the first finger. (pg 70)

What is the arm signal to indicate a right turn? - ✓✓Hold your arm straight out and the forearm and hand straight up, palm facing forward. (pg 70)

What is the correct action when faced with a flashing yellow light? - ✓✓Proceed with caution (pg 87)

What is the correct way to safely change lanes? - ✓✓Check side and rearview windows; check over your shoulder to make sure the blind spot is clear; and signal the intended move in advance. (pg 52)

• / 2