Neiep semester 100 final review Latest Update

Neiep semester 100 final review Latest Update - with 50 Questions and 100% Verified Detailed Correct Answers Guaranteed

A suspended scaffold contains 3 basic systems which hold, hand and protect. What are

these systems - CORRECT ANSWER: Support system, suspended system and safety

system

After hitting pit stop switch what is the minimum amount of time you should wait to

ensure the elevator you are working on does not move - CORRECT ANSWER: 20

seconds

An elevator mechanic working in a traction machine room should avoid entanglement by

taking which of the following precautions - CORRECT ANSWER: Tucking in loose

clothing

An individual can be killed by as little as how many amperes of current - CORRECT

ANSWER: .005

Any time a mechanic is doing any work in the elevator pit, which device is used to

disable the elevator from movement - CORRECT ANSWER: pit stop switch

Before working in the pit, what two devices must be tested and verified - CORRECT

ANSWER: Door lock and pit switch

Drawings that are approved by the building owner or representative are labeled with

what term - CORRECT ANSWER: Final

Due to the risk of injury to the public which device should always be checked for proper operation during routine maintenance - CORRECT ANSWER: Door reopening device 1 / 2

False cars must be equipped with spring-loaded safeties that are manually held in which

position? - CORRECT ANSWER: Open

How often should you inspect the parts of a working platform - CORRECT ANSWER:

Before each use

How should a mechanic access a pit that is greater than 48 inches in depth -

CORRECT ANSWER: Pit ladder

How to turn Kg to Lbs - CORRECT ANSWER: Multiply by 2.2

How to turn Lbs to Kg - CORRECT ANSWER: Divide by 2.2

How would you describe a class 3 fit for shaft and bore diameters - CORRECT

ANSWER: Snuggest possible allowance

If working in a noisy machine room what is a possible hazard - CORRECT ANSWER:

impaired communication

In a standard orthographic projection drawing, where is the placement of a back view if

needed - CORRECT ANSWER: Off to one side of the working drawing

Inches to millimeters - CORRECT ANSWER: multiply by 25.4

Installing hoistway limit switches what drawing will the mechanic reference - CORRECT

ANSWER: Standardized detail drawing

millimeters to inches - CORRECT ANSWER: divide by 25.4

• / 2