NFPA Certified Fire Plan Examiner

NFPA Certified Fire Plan Examiner Practice Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf

• Which NFPA standard is primarily used for building construction and fire

prevention requirements?

A. NFPA 13

B. NFPA 101

C. NFPA 72

D. NFPA 25

Rationale: NFPA 101, Life Safety Code, sets requirements for building

construction and occupancy to protect occupants from fire and smoke.

• The minimum width for an exit access door serving an occupant load of

50 is: 1 / 4

• 28 inches
• 30 inches
• 32 inches
• 36 inches

Rationale: According to NFPA 101, exit access doors must be at least 32

inches wide for occupant loads of 50 or fewer.

• Which NFPA standard governs the installation of automatic sprinkler

systems?

A. NFPA 14

B. NFPA 72

C. NFPA 13

D. NFPA 25

Rationale: NFPA 13 provides detailed standards for the design and

installation of automatic sprinkler systems.

• In plan review, a reviewer must verify that all fire-resistance-rated

assemblies meet which NFPA requirement?

• Local fire marshal discretion
• Specified rating in NFPA codes and standards
• Manufacturer’s recommendation only
• Contractor preference

Rationale: Fire-resistance-rated assemblies must comply with ratings

specified in NFPA codes to ensure adequate fire protection. 2 / 4

• Which type of occupancy has the highest level of life safety

requirements under NFPA 101?

• Business
• Assembly
• Healthcare
• Storage

Rationale: Healthcare occupancies are considered high-risk because

occupants may not be able to evacuate independently.

• The maximum travel distance to an exit in a building with a sprinkler

system is typically:

• 150 feet
• 200 feet
• 300 feet
• 400 feet

Rationale: Sprinklered buildings allow longer travel distances to exits

compared to unsprinklered buildings.

• Which NFPA standard specifies requirements for fire alarm systems?

A. NFPA 13

B. NFPA 25

C. NFPA 72

D. NFPA 101

Rationale: NFPA 72, National Fire Alarm and Signaling Code, establishes 3 / 4

requirements for design, installation, and maintenance of fire alarm systems.

8. Fire stops are installed primarily to:

• Support structural loads
• Prevent the spread of fire and smoke through penetrations
• Enhance aesthetics
• Allow air circulation

Rationale: Fire stops seal penetrations in walls, floors, and ceilings to

prevent fire and smoke from spreading.

• A plan examiner is reviewing a commercial kitchen. Which hazard is

most critical for NFPA compliance?

• Grease accumulation
• Noise levels
• Cooking equipment fire protection
• Flooring type

Rationale: NFPA standards require specific fire suppression systems (e.g.,

hood systems) in commercial kitchens to mitigate grease fires.

10. According to NFPA 101, smoke barriers are required to:

• Separate residential units only
• Limit the movement of smoke within a building
• Provide structural support
• Reduce noise transmission
• / 4