Practice Exam Questions And Correct

Ohio High-Angle Rope Rescue Technician Practice Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2025|2026 Q&A | Instant Download Pdf

• What is the primary purpose of a high-angle rope rescue system?
• To transport personnel across flat surfaces
• To lift vehicles
• To safely move rescuers and victims on steep or vertical terrain
• To anchor construction equipment

Rationale: High-angle rope rescue systems are specifically designed

to safely move rescuers and victims on slopes too steep for conventional access.

• Which type of rope is most commonly used in high-angle rescue?
• Manila rope
• Kernmantle rope
• Polypropylene rope
• Cotton rope

Rationale: Kernmantle rope, with its strong core (kern) and 1 / 4

protective sheath (mantle), provides high strength, durability, and flexibility suitable for rescue operations.

• What is the minimum breaking strength required for a life safety rope

used in high-angle rescue?

• 1,000 lbs
• 3,000 lbs
• 5,000 lbs
• 10,000 lbs

Rationale: NFPA standards specify that life safety ropes for rescue

must have a minimum breaking strength of 5,000 lbs to ensure sufficient safety margin.

• What is the purpose of a belay in high-angle rescue?
• To anchor the rope to the ground
• To act as a secondary safety line for the rescuer
• To signal the rescuer
• To raise equipment

Rationale: A belay line serves as a secondary safety line to catch a

rescuer or victim in case the primary rope system fails.

• Which knot is commonly used to tie a rope to an anchor in high-angle

rescue?

• Square knot
• Sheet bend
• Figure-eight on a bight 2 / 4

• Overhand knot

Rationale: The figure-eight on a bight creates a secure, strong loop

suitable for connecting to anchors or carabiners.

• When rigging an anchor, what is the minimum number of anchor

points recommended?

• 1
• 2
• 3
• 4

Rationale: Two anchor points are recommended to provide

redundancy and improve safety in case one fails.

• What type of anchor is considered “natural”?
• Steel beam
• Tree
• Bolt
• Screw anchor

Rationale: Natural anchors utilize existing features like trees,

boulders, or rock outcrops, reducing the need for artificial hardware.

• Which pulley system is most commonly used for mechanical

advantage in rescues?

• Simple loop
• Rope grab
• Z-rig 3 / 4

• Munter hitch

Rationale: A Z-rig (3:1 or 4:1 mechanical advantage) allows rescuers to haul heavy loads efficiently with minimal effort.

• What is the primary purpose of a friction device in high-angle rescue?
• To tie knots
• To control the speed of descent
• To anchor the rope
• To measure load weight

Rationale: Friction devices allow controlled lowering or raising of a

rescuer or patient by managing rope friction.

• Which device is commonly used for belaying a rescuer on a high-

angle slope?

• Figure-eight descender
• Grigri or similar assisted braking device
• Carabiner
• Rope clamp

Rationale: Assisted braking devices like a Grigri provide controlled

belay and improve safety during high-angle operations.

• In a rescue scenario, when should you consider using a tag line?
• To secure the anchor
• To guide and control a patient’s load during lowering or raising
• To measure rope tension
• To mark the edge of a cliff
• / 4