Texas Safety Inspection Final Exam Latest

Texas Safety Inspection Final Exam Latest Update -225 Questions and 100% Verified Correct Answers Guaranteed A+

At what depth of fluid within the master cylinder should you reject the inspection? -

CORRECT ANSWER: 1 inch below the top of the reservoir/below manufacturer

recommended level

To what speed must you get to perform a proper brake test? - CORRECT ANSWER: 20

mph

True or False: A moped is not required to have insurance coverage. - CORRECT

ANSWER: False

True or False: A vehicle only needs to be equipped with one mirror that allows a view of

at least 200 feet to the rear of the vehicle. - CORRECT ANSWER: True

True or False: All vehicles must have at least 1 rear reflector that is red in color and

placed at a height of between 15 inches and 60 inches. - CORRECT ANSWER: False

True or False: Every vehicle must be equipped with at least two head lamps. -

CORRECT ANSWER: True

True or False: If a vehicle fails the safety inspection, the owner/operator is allowed 15 days to return for one free inspection when the failing item(s) are adjusted and/or

corrected. - CORRECT ANSWER: True

True or False: The exhaust system can be patched as long as no fumes are leaking

from the system. - CORRECT ANSWER: False

• / 3

True or False: The power steering fluid being below the recommended level is not

cause for rejecting the inspection. - CORRECT ANSWER: False

True or False: The stop lights on the vehicle must be red or amber in color. - CORRECT

ANSWER: True

True or False: The tail lights can have the appearance of blue dots. - CORRECT

ANSWER: False

True or False: The windshield wiper control arm must be operational and lock in place. -

CORRECT ANSWER: True

True or False: There is a separate set of criteria for the inspection of trailers that exceed

7,500 pounds. - CORRECT ANSWER: True

True or False: Vehicles manufactured or assembled after the model year 1960 do not

need to be equipped with electrical turn signal lamps. - CORRECT ANSWER: False

True or False: We don't charge customers for failed inspections. It's better to let them know they will fail and have them return once they fix the problem. - CORRECT

ANSWER: False

True or False: You must issue a rejection of the inspection if the wheel studs, bolts,

nuts, or lugs are loose, missing, or damaged. - CORRECT ANSWER: True

What additional item must you inspect for on a school bus? - CORRECT ANSWER: Fire extinguisher

What are the duties and responsibilities of an inspector? - CORRECT ANSWER: Upon inspection completion, inform the owner or operator of any equipment that marginally meets inspection requirements Issue a signed Vehicle Inspection Report to any inspected vehicle 2 / 3

Accept full responsibility for the quality of the inspection when signing the Vehicle Inspection Report Immediately notify the Department representative if your driver's license has been suspended or revoked

What clearance lights are necessary on vehicles 80" or more in overall width? -

CORRECT ANSWER: 2 amber lights in front, and 2 red lights in rear

What color must the license plate lamp be? - CORRECT ANSWER: White

What color must the turn signal lights be in the rear? - CORRECT ANSWER: Red

What information should you check for to verify financial responsibility? - CORRECT

ANSWER: The expiration date

What is the height requirement for stop lights? - CORRECT ANSWER: Not more than

72" or less than 15"

What is the minimum tire tread depth that is acceptable? - CORRECT ANSWER: 2/32 of an inch

What model year did the emission system begin to be installed by manufacturers? -

CORRECT ANSWER: 1968

What model year vehicle (and newer) must be equipped with a high beam indicator that lights whenever the uppermost distribution of light from the head lights is in use. -

CORRECT ANSWER: 1948

What model year vehicle (and newer) must be equipped with turn signal lights? -

CORRECT ANSWER: 1960

• / 3