Ambulance Drivers Test ( answers) High speed patient transportation is usually unnecessary, but the five to seven percent that probably require "Code 3" transport include: Uncontrolled bleeding The ambulance drivers primary responsibility is: Safe patient transportation You must demonstrate your ability to safely operate an ambulance to: Your employer When driving an ambulance "Code 3" the driver should: Do all of the above If your ambulance drivers certificate has been revoked for reckless driving you may reapply after a period of not less than? One year You shall not drive an ambulance when your ability to operate the vehicle safely is adversely
affected by: Any of the above
The ambulance driver is required to inspect the ambulance: Prior to operation Dismissal of a driver because of a dishonest act committed: Must be reported to the DMV A tire may not be used on an ambulance when it is so worn that the tread depth in any two
adjacent grooves is less than: 1/32 of an inch
An ambulance driver is not required to be trained to use: Defibrillator Both left an right turn signal lights flashing at the same time on a moving passenger vehicle most
likely mean: There is a hazard or an accident ahead
The decision to use high speed patient transportation requires sound judgment because such
operation can: Co all of the above
Authority for the management of the scene of a traffic accident involving injuries is vested in
the: Public safety agency having investigative authority
Unless specifically exempted, a new ambulance driver must obtain a valid EMT-1 (Ambulance)
certificate: Within one year of initial employment
Your ambulance driver certificate may be denied or revoked for conviction of: Any of the above The exemptions granted by Vehicle Code Section 21055: Do not relive you of the duty to drive safely
- / 1