BMW Associate level ASE test Latest Update

BMW Associate level ASE test Latest Update -m Questions and 100% Verified Correct Answers Guaranteed A+

a lifting pad must be in place to lift a BMW vehicle, T or F? - CORRECT ANSWER: True

A technician should consider which of the following questions for a quality control process after performing service work to a vehicle?Did I address all concerns?Did I top off all fluids and set tire pressure?Did I reset service lights?

All of the above - CORRECT ANSWER: All of the above

According to MSDS warning symbols, the warning symbol with a skull and cross bones

shown represents - CORRECT ANSWER: Acute toxicity

All BMW special tools are autoship to the dealer.

True or False? - CORRECT ANSWER: False

All brand new BMW vehicles require a QC1 inspection.

Tech A states that transport Mode should be deleted using ISTA.

Tech B says that transport mode should be deleted using the transport mode switching

device. - CORRECT ANSWER: Both A and B

All of the following are true concerning the Roundtable, EXCEPT :

There are 12 shows each year.Each Roundtable has a bulletin describing the topics.The Roundtable is accessed through AIR.

Each Roundtable has a quiz - CORRECT ANSWER: The Roundtable is accessed

through AIR.

Battery voltage is not critical when performing a voltage drop on a circuit.

True or False? - CORRECT ANSWER: Flase

BMW recommends replacing tire at least every 6 years

what resource can you use to determine that the above statement is correct? -

CORRECT ANSWER: Owners Manual

BMW special took 83 30 0 492 467 can be used during an inspection to measure:

Coolant level 1 / 2

Coolant concentrate Brake pad thickness and tire thread depth

Air pressure - CORRECT ANSWER: Brake pad thickness and tire thread depth

CPO inspections require a minimum tread depth of 3 mm, as measured from the lowest area in the tread. T or F? - CORRECT ANSWER: False (from top of wear indicators)

During a CPO inspection, a front brake pad measurement is taken of 4mm on the left inner pad and 7mm on the left outer pad.

Technician A says the pads are within specifications.

Technician B says the inner pad is at the minimum allowed specifications.

Who is correct? - CORRECT ANSWER: Neither A or B

During a CPO inspection, all of the following items will need to be addressed before the

CPO sale, EXCEPT:

Mismatched tires Aftermarket windshield OEM brake pads with 4mm thickness of material remaining

Wheel with a lateral runout of 1.2mm - CORRECT ANSWER: Aftermarket windshield

During a CPO inspection, which of the following will irreversibly disqualify a vehicle from

the CPO program:

Modified suspension Aftermarket windshield Genuine BMW Performance exhaust

Aftermarket brake pads - CORRECT ANSWER: Modified Suspension

Engine oil Top-up services may be reimbursed under the terms of the BMW Maintenance Program when it is "active" on the vehicle. - CORRECT ANSWER: True

If the vehicle is placed in transport mode and the vehicle battery voltage drops below 12 volts (approximately 30% State of Charge), the "Replace Battery" message will be displayed in the instrument cluster.

Tech A says that charging the battery back to 100% State of Charge and clearing faults will remove the message from the instrument cluster.

Tech B says that running Energy Diagnosis and clearing faults will remove the message

from the instrument cluster. - CORRECT ANSWER: Neither A nor B

If you wear prescription lenses, you do not need additional eye pro against eye hazards,

T or F? - CORRECT ANSWER: False

• / 2