Certification Exam Guide Latest

NCCO Articulating Crane Operator Certification Exam Guide (Latest Update 2025 / 2026) Questions and Answers | Grade A | 100% Correct

Question:

Which of the following standards pertains to articulating boom cranes?

Answer:

ASME B-30.22

Question:

Where should the load's center of gravity be when lifting with forks?

Answer:

On or between the forks

• / 4

Question:

Ancillary lifting attachment capacities

Answer:

May be less than the crane rating

Question:

Wall board forks are not approved for

Answer:

slings

Question:

If you must lift loads of various sizes during the job, you should...

Answer:

Adjust the width of the fork tines as required to assure proper load balance

Question:

Overloading the fork assembly could cause

Answer:

Uncontrollable fork opening

• / 4

Question:

Any rigging devices in use are

Answer:

Considered part of the load

Question:

Material that is slip resistant must be provided

Answer:

At each stand up platform control station

Question:

When operating the crane using remote control, you should never...

Answer:

Walk backwards

Question:

Which of the following is not a capacity deduction?

Answer:

Manual extension in use

• / 4

Question:

When using a manual boom extension

Answer:

You should never exceed the manual extension rating

Question:

When trying to calculate how much a crane can actually lift...

Answer:

Deduct the weight of everything below the boom tip from gross capacity

Question:

If radius falls between stipulated (given) values on the load chart you

Answer:

use the lower capacity

Question:

Rigging and attachment capacity

Answer:

may be a capacity restriction for the lift

• / 4