Certification Exam Practice Questions

Certified Safety Professional (CSP) Certification Exam Practice Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf

• Which of the following is the primary purpose of a Job Safety Analysis

(JSA)?

• To comply with OSHA recordkeeping requirements
• To evaluate employee performance
• To identify hazards and implement controls before work begins
• To develop company policies

Rationale: A Job Safety Analysis systematically identifies hazards in a

specific job and establishes controls to prevent incidents.

• What is the OSHA standard that regulates Hazard Communication?

A. OSHA 1910.134 1 / 4

B. OSHA 1910.120

C. OSHA 1910.1200

D. OSHA 1926.501

Rationale: OSHA 1910.1200 specifically addresses the Hazard

Communication Standard, ensuring employees know the hazards of chemicals they work with.

• Which type of fire extinguisher is suitable for electrical fires?
• Water
• Foam

C. CO2

• Wet Chemical

Rationale: CO2 extinguishers are non-conductive and suitable for

Class C fires involving electrical equipment.

• Which safety management system emphasizes continuous

improvement through Plan-Do-Check-Act?

A. ISO 14001

B. OHSAS 18001

C. ISO 45001

D. NFPA 70E

Rationale: ISO 45001 is a safety management system framework that

uses PDCA (Plan-Do-Check-Act) for continual improvement of occupational health and safety. 2 / 4

• What is the leading cause of occupational fatalities in the construction

industry?

• Falls
• Struck-by incidents
• Electrocution
• Caught-in/between

Rationale: “Struck-by” incidents, including falling objects and

vehicles, are among the most common causes of fatalities in construction.

• Which of the following best describes a “near miss”?
• An event that causes permanent disability
• An event with minor injury
• An unplanned event that did not result in injury or damage but

could have

• A scheduled safety drill

Rationale: A near miss is a close call that had the potential to cause

injury or damage but did not.

• What does the hierarchy of controls prioritize?
• Personal protective equipment first
• Elimination and substitution first
• Administrative controls first
• Engineering controls last 3 / 4

Rationale: The hierarchy of controls prioritizes eliminating hazards at

the source before relying on PPE or administrative controls.

• Which PPE is specifically required when working with hazardous

chemicals?

• Safety glasses
• Chemical-resistant gloves and apron
• Steel-toed boots
• Hearing protection

Rationale: Chemical-resistant gloves and aprons are required to

prevent chemical exposure on the skin.

9. In risk assessment, risk is commonly calculated as:

• Likelihood × Severity
• Frequency × Duration
• Probability × Consequence
• Hazard × Exposure

Rationale: Risk is a function of the probability of an event occurring

and the severity of its consequences.

• Which agency establishes permissible exposure limits (PELs) for

chemical hazards in the workplace?

A. EPA

B. NFPA

C. OSHA

• ANSI
• / 4