Certification Practice Exam Questions And

AGMT Architectural Glass & Metal Technician Certification Practice Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf

(Covers: Safety, Tools & Equipment, Glass Handling, Installation, Sealants,

Blueprint Reading, Codes & Standards, and Quality Control)

• What is the primary federal safety regulation that governs

construction site safety for glass and glazing work?

a) ASTM E1300

b) ANSI Z97.1

c) OSHA 29 CFR 1926

d) NFRC 100

Rationale: OSHA 29 CFR 1926 sets construction safety standards,

including those for glass installation and elevated work.

• Which personal protective equipment (PPE) should always be worn

when handling glass?

a) Hard hat and steel-toe boots only

b) Cut-resistant gloves, safety glasses, and long sleeves 1 / 4

c) Respirator and earmuffs

d) Welding helmet and apron

Rationale: PPE must protect against cuts and eye injuries; gloves,

sleeves, and safety glasses are mandatory for glass handling.

• What is the safest way to transport large sheets of glass manually?

a) Flat in horizontal position

b) Dragged on the floor

c) Vertically on edge using glass carriers

d) Stacked without supports

Rationale: Glass is strongest when transported vertically; glass

carriers maintain control and reduce risk of breakage.

• What type of crane attachment is commonly used to lift large glass

panels?

a) Sling hook

b) Magnet

c) Vacuum lifter

d) Clamp chain

Rationale: Vacuum lifters provide secure, even suction across the

panel, minimizing stress and breakage.

• When setting a glass panel into a curtain wall frame, what material

cushions the glass edges?

a) Silicone sealant

b) Setting blocks 2 / 4

c) Spacer tape

d) Backer rod

Rationale: Setting blocks distribute the load evenly and prevent

direct contact between glass and frame.

• What is the primary function of a glazing gasket?

a) To support the glass weight

b) To act as insulation

c) To seal and cushion the glass in the frame

d) To hold the frame in place

Rationale: Gaskets prevent air and water infiltration while

cushioning glass movement.

• Which type of glass is most commonly required for safety glazing in

doors?

a) Tempered glass

b) Annealed glass

c) Laminated float glass

d) Wired glass

Rationale: Tempered glass meets safety glazing standards by

breaking into small, less harmful pieces.

• When should a suction cup lifter be inspected?

a) Monthly

b) Weekly

c) Before each use 3 / 4

d) Annually

Rationale: Each use inspection ensures the suction seals are intact

and the device operates safely.

• Which tool is used to measure the squareness of a window or door

frame?

a) Level

b) Tape measure

c) Framing square

d) Chalk line

Rationale: A framing square verifies 90° angles to ensure the frame is

properly aligned.

• What does the acronym “NFRC” stand for?

a) National Fire Rating Council

b) National Fenestration Rating Council

c) National Frame Regulation Committee

d) New Federal Roofing Code

Rationale: NFRC establishes energy performance ratings for

windows, doors, and glazing systems.

• What is the minimum required safety factor for glass lifting

devices according to OSHA?

• 1.5
• 3.0
• 5.0
• / 4