COPYRIGHT THESTAR ALL RIGHTS RESERVED 1

COPYRIGHT © THESTAR ALL RIGHTS RESERVED 1

To provide protection in the cranes work area, barriers MUST be erected in accessible areas; - ANS Within the equipment's rotating structure

All of the following can cause a two-block condition except: - ANS Raising the boom

When rotation of load may be hazardous, the operator must - ANS Ensure tag line is used

According to OSHA 1926 Subpart cc, which of the following individuals is not allowed within the fall zone? - ANS Qualified evaluator

The term that is used to define the load plus all rigging components, hooks, blocks and lifting

equipment is: - ANS Gross load

According to OSHA 1926 Subpart CC, the minimum distance that must be maintained between

a working crane, load or load line and an 8kV power line is: - ANS 10ft

What is the sum of the following deductions? Block 1250lbs, Rigging 23lbs, Spreader beam 350lbs - ANS 1623lbs

When a crane is set up to close to a new building, expect the ground to be: - ANS Soft

A vertical basket hitch is rated at what percentage of a vertical hitch? - ANS 200%

NCCCO PREP EXAM QUESTIONS

AND ANSWERS 1 / 2

COPYRIGHT © THESTAR ALL RIGHTS RESERVED 2

When is the hoist line on top of the boom considered part of the load? - ANS It is not considered

When a heavy load is lifted, what is the result? - ANS Boom deflection

According to OSHA 1926 Subpart CC, for cranes traveling with no load, what is the minimum clearance for energized power lines at 40kV? - ANS 6ft

Wich of the following rigging configurations is listed in order of the strongest to weakest? - ANS Basket, Vertical, Choker

According to OSHA 1926 Subpart CC, how many randomly distributed broken wires in rotation resistant wire rope are cause for replacement? - ANS 2 broken wires in 6 rope diameters

What site conditions must an operator be concerned about prior to setting up a crane? - ANS Soil stability must be sufficient

The best way to determine the weight of load to be lifted is to: - ANS Have certified load weight and add in the weight of all the rigging

What source should be used to determine boom tip height? - ANS Working range diagram

In order for an overhead power line to be considered de-energized it must be verified by the: - ANS Line owner

The purpose of the load moment indicator is to: - ANS Warn the operator of an overload condition

• / 2