Delta Airlines Ramp Test Exam Delta

Delta Airlines Ramp Test Exam Delta Airlines Actual Exam Update Latest Questions and Correct Answers Rated A+

A class B fire extinguisher is used to fight what kind of fire?

• Flammable liquid fire
• Paper fire
• Electrical fire
• Wood fire -ANSWER-A Flammable liquid fire B(Boil)

How far away should you stay away from engines to avoid suction? - ANSWER-15 Feet away/ Above idle speed 25 feet away

What is Jet Blast? -ANSWER-When air blows out the back of the engines

What is the blast area of jet blast? -ANSWER-250 Feet

What is two hazards of jet blast -ANSWER-Temp & Velocity

Never stand where, While jet engines are on? -ANSWER-In the front or back of the plane

Air craft engines can cause what -ANSWER-Hearing loss and disorientation

What does FOD stand for? -ANSWER-Foreign Object Debris

What are 4 examples of FOD? -ANSWER-Bolts, Rocks, luggage tags, zippers

If Fod is seen on the ramp how should it be disposed of -ANSWER- Throw it away in a garbage can and make sure lid is shut

What are the guidelines for approaching an aircraft? -ANSWER-1.Look to see if an engine has begun to spool down

• Look to see if an aircraft's beacon light is off

How is spool down identified? -ANSWER-Visible white swirl markings on the intlet cone and/or fan blades become visible.

How else can spool down be identified? -ANSWER-By the sound of the engine

Aircraft Beacon Lights will flash when.... -ANSWER-1. The engines are about to start 2.The engines are running

• The aircraft is about to move
• The hydraulics are activated.
• The aircraft is pressurized
• Other maintenance functions

Which air crafts do not require the beacon lights to be off before approaching an aircraft? -ANSWER-DC Carriers

Personnel are not allowed to approach dc carriers until when? - ANSWER-The engines have been turned off

Wing walkers must remain where while the engines spool down? - ANSWER-At the wing tips of the plane and not approach until engines have spooled down.

Where will the marshall Stand? -ANSWER-In the vicinity of nose gear going no further than the fuslage than the power connection point until the engines have begun to spool down and the engine lights are off

What are two saftey areas to be aware of? -ANSWER-Safety zones and safety diamonds.

What are safety zones used for? -ANSWER-To mark the clear area which must remain clear of ground support equipment (GSE) and must cover the entire foot print of the aircraft

Safety zones ensure what? -ANSWER-That the aircraft will not contact (GSE) during taxi in or push back

(GSE) may on be placed in the safety zone if what? -ANSWER-if its placed within designated parking ares defined by white lines

Brakes need to be what prior to coming into a safety zone? - ANSWER-Tested

A safety cone and/or nose gear chock will be positioned where? - ANSWER-At the nose gear stop point

Main gear chocks are not permitted where? -ANSWER-Inside the safety zone

Equipment must not come within how many feet of an air craft - ANSWER-5 feet

Equipment that must not come within 5 feet of an aircraft is known as what? -ANSWER-No drive zone

Safety diamonds are a no drive zone True or False -ANSWER-True

The Safety diamond is established by what? -ANSWER-(Delineators) saftey cones placed at specific points around the aircraft

Ground support equipment (GSE) and delineators should be placed within the safety diamond and intended movement of an aircraft prior to arrival True or False -ANSWER-False

Prior to arrival the marshal must verify what? -ANSWER-the correct stopping mark

Breaks on (GSE) must be tested when? -ANSWER-Prior to entering the safety diamond

How are brakes (GSE) Tested? -ANSWER-Coming to a complete stop before entering the safety diamond

Self-propelled needed to service the aircraft is allowed in the safety diamond when? -ANSWER-when a guide person is used for positioning equipment into, out of and within the safety diamond

For self-propelled equipment the guide person must be in a position to give positive visual clearance to the operator true or false -ANSWER- True

self-propelled equipment must never be within 5 feet of an aircraft true or false? -ANSWER-true

Belt loaders are not permitted within 5 feet of an aircraft true or false - ANSWER-False