Delta Ramp Procedures Actual Exam

Delta Ramp Procedures Actual Exam Delta Ramp Agent Procedures Exam Update Latest Questions and Correct Answers Rated A+

What is Ground Operations Manual (GOM) -ANSWER-The manual that governs ramp policies and procedures

Working on the ramp is like being on display in a -ANSWER-Fish bowl

All of our customers expect us to -ANSWER-- Provide a safe airport and flight experience

• And transport their baggage or cargo to the correct destination
• Provide on time arrivals and departures

Flights that begin in your station are referred to as -ANSWER- Originators

Flights that end in your station are referred to as -ANSWER- Terminators

Flights that arrive in your station and continue on to another station that have the same flight number are called -ANSWER-Thru flights

What does Personal Protective Equipment consist of? -ANSWER-- Steeled toe shoes

• Bump Cap
• Visible Vest
• Hearing Protection

T or F: You should always have two hands on one bag -ANSWER-

True

What are possible warning signs that severe weather may be approaching? -ANSWER-- Sudden wind gusts

• Sudden drop in temperature
• Thunder
• Dark clouds

Aircraft Lead In Line -ANSWER-- Used to Properly position the aircraft at the gate

• It includes hash marks that indicate the stopping point for each

specific aircraft

Aircraft Safety Zone -ANSWER-Outlined by a red and white line and provides a visual boundary around the aircraft so pilots and ground crews can visually confirm the area is clear of possible obstructions

Boarding Bridge Stow Box -ANSWER-The ramp crew will be responsible for ensuring that both boarding bridge tires are completely inside the Stow Box area with the canopy retracted to the fullest extent prior to aircraft arrival or pushback

No Drive Zone -ANSWER-An invisible area extending five feet outward from the aircraft fuselage and wings

What are two factors of jet engine blast -ANSWER-- temperature

• velocity

Engine Spool Down -ANSWER-When an engine has begun to spool down the white swirl in the center will become visible as well as the fan blades

Delta Airlines uses the ___ standards for ramp hands signals - ANSWER-International Air Transport Association (IATA)

Fully extend wands and arms downwards at a 45 degree angle to the sides. Hold position until the aircraft is clear of all objects and personnel -ANSWER-Hold Position

Each piece of motorized Equipment must be performed prior to the start of each shift -ANSWER-Pre-Operational Inspection

Any item to be towed must have the ___ set and ___ stowed properly when parked -ANSWER-Parking brake Towing Bar Tongue

What aircraft uses a Yoke Type tow bar that is fastened to the nose gear axle -ANSWER-B717

Connects the aircraft to the jet tug for aircraft movement. It's use is determined by the aircraft type to be moved -ANSWER-Aircraft Tow Bars

What aircraft uses a Tail Stand to assist with tail to prevention? -

ANSWER-B737-900

Are also used for guiding GSE and communicating with GSE operators/drivers -ANSWER-IATA hand signals

What are Non-motorized equipment? -ANSWER-Tow-Bar Fire Extinguishers Spill carts Baggage Carts

Boarding Bridge Water Cabinet

What are motorized equipment? -ANSWER-Container loader Air start Bag tug Belt loader

What is the ship number for B-717 -ANSWER-9500s

What is the Fuselage -ANSWER-The main body of the aircraft

Functions of Bin Webbing -ANSWER-Restrains bags/cargo from shifting during plane operation (takeoff, flight and landing)

• prevents bags/cargos from falling against the door, making it difficult

to open at the arrival city

• prevents possible injury from falling cargo when doors open

Bin webbing should never be allowed to __ __ outside of the compartment door. Metal components on the webbing can strike the ___ causing damage -ANSWER-Hang loose Fuselage

Who do you notify when bin serving is missing? -ANSWER-ALA/AIC

Who do you notify if an aircraft arrives at your station with unsecured bin warning webbing and the webbing is in good working condition?So they can complete a bin load discrepancy (BLD) -ANSWER-ALA /

AIC / OSM

Chocks should lightly contact the ____ of the tires and be positioned parallel to the axle -ANSWER-Center line (rubber to rubber)