Exam Practice Questions And Correct

Accessibility Lift Technician Licensing Exam Practice Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf

• Which standard primarily governs accessibility lifts in North America?

A. ASME A17.1

B. ASME A17.3

C. ASME A18.1

D. ISO 9386

Rationale: ASME A18.1 is the standard specifically written for accessibility

lifts, platform lifts, and stairway chairlifts.

• What is the maximum platform incline for an inclined platform lift? 1 / 4

A. 20°

B. 45°

C. 60°

D. 75°

Rationale: Most accessibility inclined platforms are rated to operate at

inclines up to about 45°, per design limitations and ASME A18.1.

• Which device prevents roll-off from a vertical platform lift?
• Overspeed governor
• Slack-rope switch
• Platform gate/guard panel
• Guide rail clip

Rationale: Roll-off protection requires a mechanical gate or panel that

locks during travel.

4. The minimum rated load for a standard vertical platform lift is typically:

• 225 lb
• 350 lb
• 750 lb
• 1,500 lb

Rationale: ASME A18.1 specifies minimum load capacities commonly set at

750 lb to accommodate wheelchairs and caregivers. 2 / 4

5. The top landing gate on a vertical platform lift must:

• Be open during travel
• Lock automatically when the lift leaves the landing
• Require manual latch engagement
• Have no interlock

Rationale: Landing gates must interlock and lock automatically once the

platform moves.

• Which electrical protection is required for lift control circuits?
• 480V feed
• Low-voltage control circuits
• No grounding
• Open wiring

Rationale: Accessibility lifts use low-voltage controls for safety.

• What is the typical maximum travel for a platform lift under ASME

A18.1?

• 6 ft
• 20 ft
• 14 ft 3 / 4

• 30 ft

Rationale: Most vertical platform lifts are limited to about 14 ft of travel.

• What device ensures the lift stops if the platform frame collapses or

drops?

• Hall sensor
• Encoder
• Safety nut/device

D. UPS

Rationale: A safety nut or safety device catches a falling platform screw

assembly.

• What is the required minimum platform size for wheelchair

accessibility?

• 24" × 24"
• 30" × 36"
• 36" × 54"
• 48" × 48"

Rationale: 36x54 inches is the standard minimum usable area for

accessibility lifts.

• What must happen if an obstruction is detected under the platform?
• / 4