EXAM QUESTIONS AND CORRECT

NCCCO Telescopic Boom Crane- Swing Cab(TLL)

EXAM QUESTIONS AND CORRECT

DETAILED ANSWERS WITH (VERIFIED ANSWERS)

|ALREADY GRADED A+||NEWEST VERSION

Science Engineering Mechanical Engineering Save Practice questions for this set Learn1 / 7Study using Learn According to OSHA 1926 subpart cc, floats/pads must be fastened to the outrigger/stabilizers when Select the correct definition 1Longest section can be overloaded 2 Determined by the crane manufacturer 3They are in use4Off the supporting surface Don't know? 1 / 2

A crane is operating with a long boom, on outriggers, on uneven ground. Under these conditions it is important to Block under the float or pad to achieve a 90 degree angle between the cylinder rod and the float or pad What is the purpose of a boom length indicator?Indicates the extended length of boom According to OSHA 1926 subpart cc, floats/pads must be fastened to the outrigger/stabilizers when They are in use A crane's jib is offset 15 degrees versus it's original

• degree offset and the

boom angle remains unchanged, the load radius will Increase When leaving telescopic boom cranes unattended overnight or for longer periods, the boom should be Fully retracted and stowed On a telescopic boom truck crane that has all 5 outriggers properly positioned, the working area diagram will indicate the "over front" area is Determined by the crane manufacturer According to OSHA 1926 subpart cc, who determines if a crane can be used for pick and carry operations?The manufacturer

• / 2