CA D49 Tree Service Contractor Exam Questions And Correct Answers (Verified Answers) Plus Rationale2026 Q&A| Instant Download Pdf
- What is the minimum clearance required between a tree and overhead
- 2 feet
- 5 feet
- 10 feet
- 15 feet
- 5 feet
electrical lines before pruning can begin?
Rationale: A minimum of 5 feet clearance is required for safe
pruning near overhead electrical lines to prevent accidental contact.
- Which type of tree is most susceptible to disease when improperly
- Oak
- Maple
- Pine
- All of the above
- All of the above
pruned?
Rationale: All tree species are susceptible to disease if pruning cuts
are not properly made, particularly at the wrong time of year.
- When is the optimal time to prune most deciduous trees?
- Early spring before leaf-out
- Mid-summer
- Late autumn
- Winter
- Early spring before leaf-out 1 / 3
Rationale: Pruning in early spring promotes strong growth and
allows the tree to heal quickly.
- Which piece of equipment is essential for climbing large trees safely?
- Pole saw
- Chainsaw
- Climbing harness and rope
- Hedge trimmer
- Climbing harness and rope
Rationale: A climbing harness and rope are critical for safety when
ascending and working in large trees.
- What is the first step in assessing a tree for removal?
- Determine the tree’s age
- Conduct a risk assessment
- Start cutting branches
- Notify neighbors
- Conduct a risk assessment
Rationale: Risk assessment identifies hazards such as nearby power
lines, structures, and the tree’s structural integrity.
- What is the correct method to remove a dead limb from a tree?
- Cut from the bottom only
- Cut from the top only
- Use a three-cut method
- Use a chainsaw without precautions
- Use a three-cut method
Rationale: The three-cut method prevents bark tearing and ensures
safe removal of large limbs.
- Which of the following is a common symptom of root rot?
- Leaves turning yellow
- Wilting during dry periods
- Mushrooms at the base
- All of the above
- All of the above
Rationale: Root rot often shows multiple symptoms including leaf
discoloration, wilting, and fungal growth at the base.
- What is the most effective way to prevent tree damage during
- Water daily 2 / 3
construction?
- Apply fertilizer
- Install root protection zones
- Remove all nearby trees
- Install root protection zones
Rationale: Root protection zones prevent soil compaction and damage
to roots during construction activities.
- When using a chainsaw on a tree limb overhead, what is a key safety
- Stand directly under the limb
- Cut from a ladder
- Ensure a clear escape path
- Hold the chainsaw with one hand
- Ensure a clear escape path
precaution?
Rationale: Having a clear escape path prevents injury if the limb falls
unpredictably.
- What is the purpose of cabling and bracing in tree management?
- Increase leaf production
- Reduce risk of branch failure
- Promote root growth
- Accelerate flowering
- Reduce risk of branch failure
Rationale: Cabling and bracing provide structural support to weak
limbs and prevent failure.
- Which type of soil is most prone to compaction damage to tree
- Sandy
- Clay
- Loam
- Gravel
- Clay
roots?
Rationale: Clay soils compact easily, restricting root growth and
water penetration.
- What is the correct depth to water a mature tree during a dry
- 2–3 inches
- 6–8 inches
- 12–18 inches
- / 3
season?