Exam Questions And Correct Answers

BICSI Technician Certification Practice Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf

• What is the primary responsibility of a BICSI Technician?
• Designing structured cabling systems
• Installing, terminating, testing, and troubleshooting structured cabling

systems

• Managing construction schedules
• Inspecting electrical conduit installations

Rationale: The BICSI Technician ensures proper installation, termination,

and testing of structured cabling in accordance with standards.

• Which standard defines the commercial building telecommunications

cabling system?

• NEC Article 800
• ANSI/TIA-568 series 1 / 4

C. ISO/IEC 11801

D. IEEE 802.3

Rationale: The ANSI/TIA-568 series outlines the requirements for

commercial building telecommunications cabling systems.

• What is the minimum bend radius for UTP cable during installation?
• 1x the cable diameter
• 2x the cable diameter
• 4x the cable diameter
• 8x the cable diameter

Rationale: The minimum bend radius for UTP cable is four times the cable

diameter to prevent signal loss or damage.

• When pulling copper cables, what is the maximum pulling tension?
• 10 lbf
• 15 lbf
• 25 lbf
• 50 lbf

Rationale: The maximum recommended pulling tension for a four-pair UTP

cable is 25 pounds-force to avoid stretching or damaging the pairs.

• / 4

• What type of connector is commonly used on coaxial cable?
• F-type

B. RJ-45

• SC
• LC

Rationale: F-type connectors are standard for coaxial cables in video and

broadband applications.

• Which color pair is used for pins 4 and 5 in a T568B termination?
• Orange
• Blue
• Green
• Brown

Rationale: In T568B, the blue pair (pair 1) occupies pins 4 and 5.

• Which tool is used to install UTP cable conductors into IDC terminals?
• Crimping tool
• Punch-down tool
• Stripping tool
• Tone generator

Rationale: A punch-down tool seats and terminates wires into insulation

displacement connectors. 3 / 4

• Which of the following is a characteristic of Category 6A cable?
• Supports up to 100 MHz
• Uses RG-6 connectors
• Is used only for telephone systems
• Supports 10 Gigabit Ethernet up to 100 meters

Rationale: Category 6A is rated for 10GBASE-T Ethernet at 100 meters.

• What is the maximum distance for a copper horizontal cabling run

according to TIA?

• 50 meters
• 90 meters
• 100 meters
• 120 meters

Rationale: The horizontal permanent link is limited to 90 meters, with

patch cords totaling 10 meters.

• What is the main function of a patch panel?
• To boost network signal strength
• To organize and connect horizontal cabling to network equipment
• To serve as a data switch
• To test network cables
• / 4