Exam Questions And Correct Answers

Certified Fire Inspector I (CFI-I) Practice Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf

• Which of the following is the primary purpose of fire prevention

inspections?

• To penalize property owners
• To detect arson
• To ensure compliance with fire codes
• To train firefighters

Rationale: The main goal of fire inspections is to reduce fire hazards

and ensure code compliance, not to punish.

2. NFPA 1 is the code primarily used for:

• Electrical installations
• Fire prevention and fire code regulations
• Building structural design 1 / 4

• Emergency medical services

Rationale: NFPA 1, Fire Code, provides comprehensive requirements

for fire prevention and protection in buildings.

• The minimum width of a required means of egress for an assembly

occupancy is:

• 24 inches
• 32 inches
• 36 inches
• 44 inches

Rationale: NFPA and IBC standards require a minimum egress width

of 36 inches for safety.

• Which class of fire involves ordinary combustibles such as wood,

paper, and cloth?

• Class A
• Class B
• Class C
• Class D

Rationale: Class A fires involve common combustible materials.

5. Sprinkler systems are most effective at controlling:

• Electrical fires
• Fires in their incipient stage
• Large outdoor fires
• Gas leaks 2 / 4

Rationale: Automatic sprinklers are designed to activate early and

suppress fires before they spread.

6. The purpose of a fire wall is to:

• Support the building structure
• Act as a smoke barrier
• Prevent the spread of fire between sections of a building
• Provide ventilation

Rationale: Fire walls are designed to contain fire within one section

to protect other areas.

• What is the maximum travel distance to an exit in a building with a

sprinkler system?

• 100 feet
• 200 feet
• 250 feet
• 300 feet

Rationale: Sprinkler systems increase allowable exit travel distance

because they help control fire spread.

• Which type of inspection is conducted during construction before

occupancy?

• Annual inspection
• Acceptance inspection
• Follow-up inspection
• Complaint inspection 3 / 4

Rationale: Acceptance inspections verify that new construction

complies with codes before the building is occupied.

9. A fire inspector should carry out follow-up inspections:

• Only if violations are reported
• Once every five years
• To ensure previously identified hazards have been corrected
• Only in high-rise buildings

Rationale: Follow-up inspections confirm that corrective actions have

been taken to address hazards.

10. The minimum rating for a fire door in a stairwell is:

• 20 minutes
• 30 minutes
• 60 minutes
• 90 minutes

Rationale: Stairwell fire doors are required to have a 1-hour rating to

prevent fire spread.

11. Class B fires involve:

• Wood and paper
• Flammable liquids and gases
• Electrical equipment
• Combustible metals

Rationale: Class B fires are fueled by flammable liquids and gases.

• / 4