FDNY C91 Supervision of Storage, Handling and Use of Hazardous Materials Practice Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf
- Which of the following is the primary federal agency responsible for
regulating hazardous materials transportation?
A) EPA
B) OSHA
C) DOT
D) NFPA
Rationale: The Department of Transportation (DOT) sets regulations
for the safe transport of hazardous materials under 49 CFR.
- What is the primary hazard class for flammable liquids according to
- Class 1 1 / 4
DOT regulations?
- Class 3
- Class 4
- Class 5
Rationale: DOT Class 3 includes flammable and combustible liquids,
such as gasoline and acetone.
- Under NFPA 704, what does a red diamond indicate?
- Health hazard
- Reactivity hazard
- Flammability hazard
- Special hazard
Rationale: In the NFPA 704 “fire diamond,” red represents
flammability, blue represents health, yellow represents instability, and white represents special hazards.
- The OSHA Hazard Communication Standard requires employers to
maintain:
- Safety Data Sheets (SDS) for all hazardous chemicals
- Fire extinguishers in all areas
- Personal hygiene facilities only for flammable materials
- Monthly chemical inventories
Rationale: OSHA 29 CFR 1910.1200 requires that SDSs be available to
employees for all hazardous chemicals.
- Which storage practice is most important for oxidizers?
- Store with flammables 2 / 4
- Store separately from flammables and combustibles
- Store near heat sources
- Store in airtight metal containers only
Rationale: Oxidizers can intensify fires; therefore, they must be
stored separately from flammable and combustible materials.
- What is the maximum quantity of Class I flammable liquids allowed in
- 10 gallons
- 25 gallons
- 55 gallons
- 100 gallons
a control area without a special permit, according to NFPA 30?
Rationale: NFPA 30 sets limits on the quantity of flammable liquids
that can be stored in areas without special permitting; for Class I liquids, 25 gallons is typically the threshold.
- What type of fire extinguisher is suitable for electrical fires?
- Water
- Foam
C) CO₂
- Wet chemical
Rationale: CO₂ extinguishers are non-conductive and suitable for
electrical fires.
- What is the main health hazard associated with hydrogen sulfide
exposure? 3 / 4
- Burns
- Respiratory paralysis
- Skin irritation only
- Eye dryness
Rationale: Hydrogen sulfide is highly toxic and can cause respiratory
paralysis or death at high concentrations.
- Which NFPA standard covers the storage and handling of flammable
and combustible liquids?
A) NFPA 10
B) NFPA 704
C) NFPA 30
D) NFPA 400
Rationale: NFPA 30 specifically addresses storage, handling, and use
of flammable and combustible liquids.
10. When labeling hazardous materials, the DOT requires:
- Only chemical name
- Only manufacturer information
- Proper shipping name, hazard class, and identification number
- No labeling is required if SDS is available
Rationale: DOT labeling regulations require the proper shipping
name, hazard class, and UN identification number on packages containing hazardous materials.
- / 4