Examination Practice Questions And

Illinois Rope Rescue Technician Examination Practice Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf

• Which of the following knots is primarily used to attach a rope to a

carabiner?

• Figure Eight Follow-Through
• Bowline
• Clove Hitch
• Overhand Knot
• Bowline

The bowline forms a secure loop that can easily attach to a carabiner and is reliable under load. 1 / 4

• The main purpose of a mechanical advantage system in rope rescue is

to:

• Anchor the rope
• Increase lifting or hauling efficiency
• Protect rescuers from falling
• Identify hazards
• Increase lifting or hauling efficiency

Mechanical advantage systems reduce the effort required to lift or haul a load.

• Which type of rope is commonly used for rope rescue operations?
• Manila rope
• Dynamic climbing rope
• Static rope
• Hemp rope
• Static rope

Static ropes have minimal stretch, making them ideal for controlled lowering and hauling.

4. A “Z-rig” in rope rescue is an example of:

• A pulley anchor
• A mechanical advantage system
• A knot-tying technique
• A belay device
• A mechanical advantage system 2 / 4

A Z-rig uses pulleys and ropes to gain mechanical advantage for hauling loads.

• Which safety factor is recommended for anchor systems in technical

rope rescue?

A) 1:1

B) 2:1

C) 5:1

D) 10:1

C) 5:1

A safety factor of 5:1 is recommended to ensure anchor reliability

under dynamic loads.

6. The main purpose of a belay in rope rescue is to:

• Secure the rope to the load
• Control rope slack and prevent falls
• Anchor the mechanical advantage system
• Store rope efficiently
• Control rope slack and prevent falls

Belaying provides controlled rope management to protect rescuers or victims from uncontrolled falls.

• Which type of anchor is considered a natural anchor?
• Steel bolt
• Tree
• Concrete anchor 3 / 4

• Ground anchor
• Tree

Natural anchors use existing features such as trees, boulders, or rock formations.

8. When rigging a rope for a vertical rescue, the first step is to:

• Tie knots
• Select an anchor point
• Attach the load
• Build a mechanical advantage system
• Select an anchor point

The anchor is critical for the safety and stability of the entire system.

• Which type of pulley is best for redirecting rope under load?
• Fixed pulley
• Prusik knot
• Progress capture pulley
• Carabiner
• Progress capture pulley

Progress capture pulleys allow rope to move in one direction while preventing backsliding.

10. The purpose of a Prusik knot in rope rescue is to:

• Attach rope to an anchor
• Create a mechanical advantage
• Provide a friction hitch for backup or ascending
• / 4