FDOT Asphalt Paving Level 2 Exam

FDOT Asphalt Paving Level 2 Exam (Latest Update 2025 / 2026) Prep Questions & Answers | Grade A | 100% Correct

Question:

In project documents order, which Document(s) has higher authority than the Supplemental Specifications?

• Standard Specifications
• Plans
• Technical Special Provisions
• All of the above
• Both B and C

Answer:

(E. Both B and C) Plans and Technical Special Provisions

• / 3

Question:

What is the desired tack coat application rate for a milled surface?

• 0.02-0.08 gal/yd²
• 0.45 gal/yd²
• 0.06 gal/yd²
• 0.08 gal/yd²
• All the above

Answer:

(C.) 0.06 gal/yd²

Question:

Density Testing for acceptance will not be performed on:

• Shoulder less than 5 feet or less
• Miscellaneous Asphalt Pavement
• Cross-overs and intersections less than 1000 feet
• Acceleration and deceleration lanes less than 1000 feet
• All the above

Answer:

(E. All the Above) - Shoulder less than 5 feet or less, Miscellaneous Asphalt Pavement, Cross-overs and intersections less than 1000 feet, and Acceleration and deceleration lanes less than 1000 feet 2 / 3

Question:

A _______ is utilized when attempting to match elevations of two mats placed side by side

Answer:

(D.) Joint Matcher

Question:

Experts maintain that 95% of paver related problems can be eliminated by:

• Keeping the hopper empty between loads
• Keeping the paver running slow
• Adjusting the tow points constantly
• Maintaining a uniform head of material in front of the auger
• All the above

Answer:

(D.) Maintaining a uniform head of material in front of the auger

Question:

When milling for slope on the mainline roadway, if the average of 10 slope checks for the VT differs from the target by 0.1% what is required?

Answer:

(A.) Tell Contractor to shut down milling operation. Make corrections

• / 3