Finish Carpentry Certification Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf
- Which tool is primarily used for trimming and smoothing wood
- Hammer
- Plane
- Chisel
- Saw
surfaces?
Rationale: A plane is specifically designed to trim and smooth wood
surfaces.
- What is the standard width of a residential interior door?
- 24 inches
- 30 inches
- 36 inches 1 / 4
- 48 inches
Rationale: 30 inches is the most common width for interior doors in
residential construction.
- Which type of joint is most commonly used in cabinet face frames?
- Dovetail joint
- Mortise and tenon joint
- Butt joint with reinforcement
- Rabbet joint
Rationale: Butt joints reinforced with screws or dowels are commonly
used in cabinet face frames for simplicity and strength.
- When installing crown molding, which tool helps achieve precise
- Chisel
- Hand saw
- Miter saw
- Circular saw
angled cuts?
Rationale: A miter saw allows accurate angled cuts, essential for
crown molding installation.
- What is the purpose of using a level during trim installation?
- To measure length
- To secure nails
- To ensure horizontal or vertical alignment 2 / 4
- To mark cutting lines
Rationale: A level ensures that trim is perfectly horizontal or vertical.
- Which nail is recommended for securing hardwood flooring?
- Roofing nail
- Finishing nail
- Common nail
- Framing nail
Rationale: Finishing nails are less visible and ideal for hardwood
flooring applications.
- What is the best wood for exterior trim that resists decay?
- Pine
- Cedar
- Poplar
- Oak
Rationale: Cedar contains natural oils that resist decay and insect
damage, making it ideal for exterior trim.
- Which adhesive is commonly used for bonding wood trim?
- Epoxy
- Wood glue (PVA)
- Silicone
- Superglue
Rationale: Wood glue provides strong bonding for wood-to-wood
connections in trim work. 3 / 4
- What is the recommended nail spacing for baseboard installation?
- 6 inches
- 8 inches
- 16 inches
- 24 inches
Rationale: Nails should be spaced about 16 inches apart to secure
baseboards firmly.
- When cutting a door jamb for installation, what tool ensures a
- Jigsaw
- Chisel and hand saw
- Circular saw
- Router
precise fit?
Rationale: Chisels and hand saws allow fine adjustments to achieve a
precise door jamb fit.
- What is the purpose of a coping saw in finish carpentry?
- Cutting straight lines
- Drilling holes
- Cutting intricate shapes and coping moldings
- Sanding edges
Rationale: Coping saws are used to cut complex profiles, especially
for coping moldings.
- / 4