PDF Download
FREE AND STUDY GAMES ABOUT SAFETY 100 EXAM
QUESTIONS
Actual Qs and Ans Expert-Verified Explanation
This Exam contains:
-Guarantee passing score -30 Questions and Answers -format set of multiple-choice -Expert-Verified Explanation Question 1: On construction sites where there is a break in elevation of 19 inches or more, and no ramp, runway, sloped embankment, or personnel hoist is provided, _____ may be used.
Answer:
stairways Question 2: If you lean a straight ladder against the top of a 16-foot wall, the base of the ladder should be ___ feet from the base of the wall.
Answer:
four Question 3: The time you spend learning and practicing _____ procedures can save your life and the lives of others.
Answer:
safety
Question 4: has a limited amount of ventilation
Answer:
confined space Question 5: The two basic types of scaffolds are manufactured and rolling _____.
Answer:
scaffolds Question 6: A(n) trench is a(n) _____ that is deeper than it is wide, and usually not wider than 15 feet.
Answer:
excavation
Question 7: A self-contained ____ has its own clean air supply.
Answer:
breathing apparatus Question 8: To reduce the risk of workers being hurt or killed by falling materials, do not ______
materials higher than a 4:1 height-to-base ratio.
Answer:
stack Question 9: The federal agency whose mission is to save lives, prevent injuries, and protect the health of America's workers is the _____.
Answer:
OSHA Question 10: Oxygen, heat, and ___ must be present in the same place at the same time for a fire to occur.
Answer:
fuel Question 11: A(n) ____ inspection is conducted after an accident that requires hospitalization of three or more workers.
Answer:
catastrophe
Question 12: OSHA construction standards require _____ foot-candles of light in stairways.
Answer:
five
Question 13: The best shoes to wear on a construction site are ____-approved.
Answer:
ANSI Question 14: Most cave-ins occur in trenches 5 to ___ feet deep and happen suddenly with little or no warning.
Answer:
fifteen Question 15: The four leading causes of death in the construction injury include electrical accidents, struck-by accidents, caught-in or caught-between accidents, and ____.
Answer:
falls Question 16: All injuries,_____ , and incidents must be reported to your supervisor.
Answer:
accidents Question 17: The process of hazard recognition, evaluation, and control is the foundation of an effective ____ program.
Answer:
safety Question 18: Observing proper safety precautions when working with and around electrical current is important because the human body can conduct electrical____.
Answer:
current
Question 19: Metal ladders should not be used near _____ equipment.
Answer:
electrical
Question 20: In construction, keeping your work area clean and free of scraps or spills is referred to as ____.
Answer:
housekeeping Question 21: Under HazCom, if you spot a hazard on your job site you must report it to your ____.
Answer:
supervisor Question 22: Personal fall ____systems are PPE used to prevent falls and protect workers who do fall.
Answer:
arrest Question 23: HazCom classifies all paint, concrete, and wood dust as ___ materials.
Answer:
hazardous Question 24: Work that is performed near a hazard but not in direct contact with it is called ____ work.
Answer:
proximity Question 25: The most common cause of death for equipment operators is equipment _____.
Answer:
rollover
Question 26: People should not be able to get past ____ barricades.
Answer:
protective Question 27: In every trench over four feet deep, there must be an exit every _____ feet.
Answer:
twenty-five