CDL Passenger Transport (P) Written Knowledge Exam Practice Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf
1. When loading passengers, you should always:
- Let them board in any order
- Load passengers from the front to the back
- Load passengers from the back to the front
- Allow passengers to stand while the bus is moving
Rationale: Loading passengers from the front to the back helps maintain
balance and allows the driver to monitor all passengers more effectively.
2. The most important reason for checking your mirrors often is to:
- Watch for road signs
- See traffic around your vehicle 1 / 4
- Look at your reflection
- Monitor tire pressure
Rationale: Mirrors help you be aware of traffic, pedestrians, and other
hazards around your bus.
- When driving a bus, the driver should maintain a following distance of
at least:
- 1 second
- 2 seconds
- 4 seconds
- 10 seconds
Rationale: Buses are large and heavy, requiring longer distances to stop
safely.
4. When a bus is equipped with a wheelchair lift, the driver must:
- Only use it for passengers who ask politely
- Ensure the lift is used safely and according to the manufacturer’s
- Let the passenger operate the lift
- Avoid using it unless it is an emergency
instructions
Rationale: Proper operation of a wheelchair lift is crucial for safety of
passengers with disabilities.
5. A bus’s suspension system is important because it:
- Reduces fuel consumption 2 / 4
- Absorbs shocks and maintains vehicle control
- Makes the bus go faster
- Helps passengers sit comfortably only
Rationale: Suspension affects both vehicle stability and passenger comfort.
6. When a passenger falls while the bus is moving, the driver should:
- Stop immediately and help
- Pull over safely before assisting
- Ignore the fall
- Ask other passengers to help immediately
Rationale: Stopping safely first prevents further accidents.
- Which of the following is a sign of a distracted driver?
- Scanning mirrors frequently
- Failing to notice traffic signals or pedestrians
- Using turn signals properly
- Maintaining lane position
Rationale: Distracted drivers often fail to notice key hazards.
- When approaching a railroad crossing without gates, the driver
should:
- Speed up to cross quickly
- Slow down, look, and listen for trains
- Stop only if lights flash
- Turn on interior lights 3 / 4
Rationale: Extra caution is required at unprotected crossings to avoid
collisions.
9. The best way to prevent passenger injuries during a crash is:
- Keep doors open
- Ensure passengers are seated and seat belts are used if available
- Stop suddenly
- Let passengers stand near the front
Rationale: Passengers are safest when seated and restrained.
- When a bus is equipped with anti-lock brakes (ABS), the driver
should:
- Pump the brakes during hard braking
- Apply steady pressure to the brake pedal
- Avoid using the brakes
- Shift into neutral
Rationale: ABS prevents wheel lockup, allowing the driver to maintain
steering control.
11. When a bus is empty, its stopping distance:
- Is longer than when full
- Is shorter than when full
- Is the same as when full
- Depends only on road conditions
- / 4