LATEST UPDATED NCCCO TSS

LATEST UPDATED / NCCCO TSS

MANITEX EXAM WITH COMPLETE

QUESTIONS AND SURE VERIFIED ANSWERS

100% GRADED AT A + SCORE SURE

GUARANTEED PASS!!

• Which of the following is an accurate statement about luffing jibs?
• ANSWER ✓ It raises and lowers independent from the boom

• What is Lay length? - ANSWER ✓ The distance required for a

strand to make a complete revolution around the rope

• What is one problem lubricating wire rope can cause? - ANSWER

✓ Obstructed view when inspecting the rope

• What would What would call for a running rope to be taken out of

service? - ANSWER ✓ Six randomly distributed broken wires and one Lay or three in one strand and one lay

• Which of these is known as a standing rope? - ANSWER ✓

Pendant line 1 / 3

• What is the weakest quadrant of a boom truck? - ANSWER ✓

Front

• What effect would blocking up the ends of the tracks have on a

crane? - ANSWER ✓ It would increase capacity over the ends

• The tipping axis of a crawler crane is? - ANSWER ✓ It depends if

the idler or sprocket are offset from track rollers

• According to ASME B30.5 what percentage should not be

exceeded on a mobile crane during a load test? - ANSWER ✓ 100%

10. Mobile crane is more stable when: - ANSWER ✓ The cranes

leverage is greater than the load leverage

• As a crane tips the loads leverage - ANSWER ✓ Increases

• What should be done if a crane has a cracked windshield? -

ANSWER ✓ Continue to operate if it causes no visible distortion

• / 3

• From strongest to weakest put the following hitches in order -

ANSWER ✓ Basket, vertical, choker

• Which of the following should synthetic slings not be used

around? - ANSWER ✓ Acid

• How often should you inspect a running rope? - ANSWER ✓

Daily

• The radius on a crane chart refers to? - ANSWER ✓ Center

of rotation to center of gravity of the load or hook

• What percentage is the manufacture rate of capacity of a

mobile crane on outriggers? - ANSWER ✓ 85%

• What percentage is the manufacture rated capacity of a rough

terrain crane on rubber? - ANSWER ✓ 75%

• If you are at a radius below the bold line on a load chart,

which does that mean? - ANSWER ✓ Tipping, stability

• / 3